HPI Vorza Flux 2.4 RTR

4This is the 2.4GHz radio controlled, brushless electric powered, all set to run
1/8 scale HPI Vorza Flux HP Buggy.

FEATURES:
Chassis: 6061 aluminum 0.16" (4mm) thick, with nylon dirt guards
Drive: 4 wheel shaft with sealed drivetrain
Motor: Flux Tork 2200kV brushless with aluminum case, machined
    cooling fins, 5mm shaft
Pinion Gear: 15T steel
Stimulate Gear: 48 tooth steel
Motor Plate: 7075 aluminum 0.12" (3mm) close 0.31" (8mm) thick
    billet machined aluminum secures
Radio: 2.4GHz
ESC: HPI Flux Blur Brushless ESC, 6S LiPo compatible with Deans
    battery adapters, 6mm bullet motor adapters and cooling fan
    PC programmable, USB Programs Set needed, order HPIC0573
Shocks: Oil-filled 16mm Huge Bore aluminum bodied
Shock Towers: Aluminum, 0.16" (4mm) thick
Differentials: 3 with spiral cut gears, oil filled
Pinion Gear: Solidified steel 15 tooth
Main Gear: Solidified steel 48 tooth
Body: Trimmed and painted 1/8 scale buggy body with nylon wing
Battery Tray: LiPo all set with secure hook and loop straps
Suspension: Long suspension arms for stability and balance, front and
    rear sway bars
Tires: HPI Proto, 1.65" (42mm) broad, 4.6" (117mm) external diameter
Wheels: V7 black chrome 1.65" (42mm) broad, 3.27" (83mm) diameter
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when viewed from the side of the vehicle in relation to the
    chassis
Camber: Adjustable front and back, camber describes the angle of the
    tops of the tires from vertical when viewed from front or behind
    automobile
Service warranty: Two-year minimal warranty through HPI starting at date of
    purchase. Service warranty valid just in the U.S.A, Canada and South America
    Service warranty not valid in the European Union
Steering servo: SB-5 Metal Gear Servo 11.8kg-cm 6.0V (HPIM1996)

INCLUDES:
RTR 1/8 scale HPI Vorza Flux HP Buggy with Brushless Motor & ESC,
    2.4GHz 2-ch Radio, Body, Wing, Tires, Wheels and User's manual

REQUIRES:
AA Batteries: 4 for transmitter
Batteries: Two 6-7 cell NiMH flat (not stick packs) a minimum of 4000mAh
    soldered packs just, no bonded tabs OR
    two 2S or 3S LiPo with a minimum of 25C score
Battery Battery charger: To match picked batteries
Connectors: Two Deans Female Ultra Plugs (WSDM1303) if picked
    batteries do not have them
Track devices

SPECS:
Car-
Length: 20" (508mm)
Width: 12" (205mm)
Height: 7" (178mm)
Wheelbase: 12-13/16" (325mm)
    Body-
Length: 13.1" (334mm)
Width: 7.71"(196mm)
Height: 3.8" (98mm)

COMMENTS:
For Replacement Ball Bearings use:
    Qty. Size Area Qty. Bearing Set
2 8x16mm Front Differential 1 DTXC1585
2 8x16mm Rear Differential 1 DTXC1585
4 8x14mm Front Hubs 2 DTXC1583
4 8x16mm Rear Hubs 2 DTXC1585
3 6x10mm Steering 2 DTXC1561
2 8x16mm Front Diff Case 1 DTXC1585
2 8x16mm Rear Diff Case 1 DTXC1585