HPI Vorza Flux 2.4 RTR

4This is the 2.4GHz radio controlled, brushless electric powered, ready to run
1/8 scale HPI Vorza Flux HP Buggy.

FEATURES:
Chassis: 6061 aluminum 0.16" (4mm) thick, with nylon dirt guards
Drive: 4 wheel shaft with sealed drivetrain
Motor: Flux Tork 2200kV brushless with aluminum case, machined
    cooling fins, 5mm shaft
Pinion Gear: 15T steel
Stimulate Gear: 48 tooth steel
Motor Plate: 7075 aluminum 0.12" (3mm) close 0.31" (8mm) thick
    billet machined aluminum secures
Radio: 2.4GHz
ESC: HPI Flux Blur Brushless ESC, 6S LiPo compatible with Deans
    battery connectors, 6mm bullet motor connectors and cooling fan
    PC programmable, USB Programs Package required, order HPIC0573
Shocks: Oil-filled 16mm Big Bore aluminum bodied
Shock Towers: Aluminum, 0.16" (4mm) thick
Differentials: Three with spiral cut gears, oil filled
Pinion Gear: Solidified steel 15 tooth
Main Gear: Solidified steel 48 tooth
Body: Trimmed and painted 1/8 scale buggy body with nylon wing
Battery Tray: LiPo ready with safe and secure hook and loop straps
Suspension: Long suspension arms for stability and balance, front and
    rear sway bars
Tires: HPI Proto, 1.65" (42mm) wide, 4.6" (117mm) external diameter
Wheels: V7 black chrome 1.65" (42mm) wide, 3.27" (83mm) diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when viewed from the side of the automobile in relation to the
    chassis
Camber: Adjustable front and back, camber refers to the angle of the
    tops of the tires from vertical when viewed from front or behind
    vehicle
Warranty: Two-year minimal service warranty through HPI beginning at date of
    purchase. Warranty valid only in the USA, Canada and South America
    Warranty not valid in the European Union
Steering servo: SB-5 Metal Gear Servo 11.8kg-cm 6.0V (HPIM1996)

CONSISTS OF:
RTR 1/8 scale HPI Vorza Flux HP Buggy with Brushless Motor & ESC,
    2.4GHz 2-ch Radio, Body, Wing, Tires, Wheels and Instruction Manual

NEEDS:
AA Batteries: 4 for transmitter
Batteries: Two 6-7 cell NiMH flat (not stick packs) a minimum of 4000mAh
    soldered packs only, no bonded tabs OR
    two 2S or 3S LiPo with a minimum of 25C rating
Battery Charger: To match chosen batteries
Connectors: Two Deans Female Ultra Plugs (WSDM1303) if chosen
    batteries do not have them
Track devices

SPECIFICATIONS:
Automobile-
Length: 20" (508mm)
Width: 12" (205mm)
Height: 7" (178mm)
Wheelbase: 12-13/16" (325mm)
    Body-
Length: 13.1" (334mm)
Width: 7.71"(196mm)
Height: 3.8" (98mm)

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Area Qty. Bearing Set
2 8x16mm Front Differential 1 DTXC1585
2 8x16mm Back Differential 1 DTXC1585
4 8x14mm Front Hubs 2 DTXC1583
4 8x16mm Back Hubs 2 DTXC1585
3 6x10mm Steering 2 DTXC1561
2 8x16mm Front Diff Case 1 DTXC1585
2 8x16mm Back Diff Case 1 DTXC1585