HPI Trophy Truggy Flux RTR

This is the brushless electrical powered, 2.4GHz radio controlled, ready to run
1/8 scale Trophy Flux Truggy Racer from HPI.

FUNCTIONS: Chassis: 6061 aluminum 0.16" (4mm) close front and rear metal
rod braces
Drive: 4 wheel shaft, with steel outdrives and axles
Motor: Flux Scream brushless 1965kV
ESC: Flux Rage, deals with 2 2S batteries for up to FOUR (14.4V) of
power
Radio: 3-channel 2.4GHz with end point modification, servo reversing,
guiding double rate, failsafe and waterproof servo for guiding
Radio Tray: Low profile aluminum
Differentials: Bevel Gear type with 4 internal gears for increased
sturdiness
Shocks: Oil-filled
Shock Towers: 6061 aluminum
Suspension: Bonus long arms for greater stability and thick
suspension pins for greater resistance versus crash damage
Steering: Bellcrank type with cast aluminum knuckles and servo saver
Body: Painted and cut with multicolor paint plan created by
Jon Miller from RCS Graphicworx
Bumpers: Front
Wheels: 7 spoke, no balanced out
Tires: HPI Shredder Block
Ball Bearings: Complete set
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when seen from the side of the vehicle in relation to
the chassis
Camber: Adjustable front and back, camber refers to the angle of the
tops of the tires from vertical when seen from front or behind
automobile

CONSISTS OF: RTR 1/8 scale Trophy Flux Truggy Racer with Brushless Motor, ESC,
Body, Rear Wing, Decals, 3-channel 2.4GHz Radio 4 AA Batteries
and Recommendations

NEEDS: Batteries: Two 2S LiPo batteries with Deans plugs
Battery Charger: For picked batteries
Maintenance and track devices

SPECS: Car-
Length: 22.8" (580mm)
Width: 15.9" (405mm)
Height: 7.1" (180mm)
Track: 14.4" (365mm) edges of tires side-to-side
Wheelbase: 14.4" (365mm)
Body-
Length: 18.3" (464mm)
Width: 7.9" (200mm)
Height: 5" (127mm)

REMARKS: For replacement or to update to ball bearings use:
Qty. Size Place Qty. Bearing Set
3 8x16mm Fr Diff 2 DTXC1585
3 8x16mm Rear Diff 2 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
4 8x16mm Rear Hubs 2 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
2 8x16mm Front Gearbox 1 DTXC1585
4 8x16mm Front Centers 2 DTXC1585
4 6x10mm Steering 2 DTXC1561