HPI Trophy Truggy Flux RTR

This is the brushless electrical powered, 2.4GHz radio controlled, prepared to run
1/8 scale Prize Flux Truggy Racer from HPI.

FEATURES: Chassis: 6061 aluminum 0.16" (4mm) close front and rear metal
rod braces
Drive: Four wheel shaft, with steel outdrives and axles
Motor: Flux Scream brushless 1965kV
ESC: Flux Rage, deals with two 2S batteries for approximately FOUR (14.4V) of
power
Radio: 3-channel 2.4GHz with end point adjustment, servo reversing,
guiding double rate, failsafe and waterproof servo for guiding
Radio Tray: Low profile aluminum
Differentials: Bevel Equipment type with four internal equipments for increased
resilience
Shocks: Oil-filled
Shock Towers: 6061 aluminum
Suspension: Bonus long arms for higher stability and thick
suspension pins for higher resistance versus crash damage
Steering: Bellcrank type with cast aluminum knuckles and servo saver
Body: Painted and cut with multicolor paint plan created by
Jon Miller from RCS Graphicworx
Bumpers: Front
Wheels: Seven spoke, absolutely no balanced out
Tires: HPI Shredder Block
Ball Bearings: Full set
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the automobile in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
car

INCLUDES: RTR 1/8 scale Prize Flux Truggy Racer with Brushless Motor, ESC,
Body, Rear Wing, Decals, 3-channel 2.4GHz Radio four AA Batteries
and Instructions

REQUIRES: Batteries: 2 2S LiPo batteries with Deans plugs
Battery Battery charger: For selected batteries
Upkeep and track equipment

SPECS: Automobile-
Length: 22.8" (580mm)
Width: 15.9" (405mm)
Height: 7.1" (180mm)
Track: 14.4" (365mm) edges of tires side-to-side
Wheelbase: 14.4" (365mm)
Body-
Length: 18.3" (464mm)
Width: 7.9" (200mm)
Height: 5" (127mm)

REMARKS: For replacement or to upgrade to ball bearings use:
Qty. Size Location Qty. Bearing Set
3 8x16mm Fr Diff 2 DTXC1585
3 8x16mm Rear Diff 2 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
4 8x16mm Rear Hubs 2 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
2 8x16mm Front Gearbox 1 DTXC1585
4 8x16mm Front Hubs 2 DTXC1585
4 6x10mm Steering 2 DTXC1561