JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

HPI Trophy Flux (HPI 107018 | HPI107018)

Model: HPI 107018
Dist. #: HPID7018   SKU: HPI107018

Be the first to review this product. (Write Review)

Out of stock

List Price:  $689.99
Price:  $529.99
You Save:  $160 (23%)

This item will earn you 530 reward point(s).
530 points = $10.60 off your next order. Learn More

Updated on Dec 5, 2022 01:34:55 PM

Trophy Truggy Flux RTR...
This is the brushless electric powered, 2.4GHz radio controlled, ready to run
1/8 scale Trophy Flux Truggy Racer from HPI.

FEATURES: Chassis: 6061 aluminum 0.16" (4mm) close front and rear metal
rod braces
Drive: 4 wheel shaft, with steel outdrives and axles
Motor: Flux Scream brushless 1965kV
ESC: Flux Rage, deals with two 2S batteries for approximately 4S (14.4V) of
power
Radio: 3-channel 2.4GHz with end point modification, servo reversing,
steering double rate, failsafe and waterproof servo for steering
Radio Tray: Low profile aluminum
Differentials: Bevel Gear type with four internal equipments for increased
toughness
Shocks: Oil-filled
Shock Towers: 6061 aluminum
Suspension: Extra long arms for higher stability and thick
suspension pins for higher resistance versus crash damage
Steering: Bellcrank type with cast aluminum knuckles and servo saver
Body: Painted and cut with multicolor paint scheme developed by
Jon Miller from RCS Graphicworx
Bumpers: Front
Wheels: Seven spoke, no balanced out
Tires: HPI Shredder Block
Ball Bearings: Full set
Caster: Adjustable, caster/toe-in describes the angle of the front
suspension when seen from the side of the vehicle in relation to
the chassis
Camber: Adjustable front and rear, camber describes the angle of the
tops of the tires from vertical when seen from front or behind
vehicle

CONSISTS OF: RTR 1/8 scale Trophy Flux Truggy Racer with Brushless Motor, ESC,
Body, Rear Wing, Decals, 3-channel 2.4GHz Radio four AA Batteries
and Instructions

REQUIRES: Batteries: Two TWO LiPo batteries with Deans plugs
Battery Charger: For chosen batteries
Upkeep and track equipment

SPECIFICATIONS: Automobile-
Length: 22.8" (580mm)
Width: 15.9" (405mm)
Height: 7.1" (180mm)
Track: 14.4" (365mm) edges of tires side-to-side
Wheelbase: 14.4" (365mm)
Body-
Length: 18.3" (464mm)
Width: 7.9" (200mm)
Height: 5" (127mm)

REMARKS: For replacement or to upgrade to ball bearings utilize:
Qty. Size Place Qty. Bearing Set
3 8x16mm Fr Diff 2 DTXC1585
3 8x16mm Rear Diff 2 DTXC1585
2 8x16mm Rear Transmission 1 DTXC1585
4 8x16mm Rear Hubs 2 DTXC1585
2 8x16mm Rear Transmission 1 DTXC1585
2 8x16mm Front Transmission 1 DTXC1585
4 8x16mm Front Centers 2 DTXC1585
4 6x10mm Steering 2 DTXC1561

Trends
#HPITrophyFlux
#TrophyFlux

X-Plosion Parts Finder Click Below For Parts Explosions For HPI Trophy Flux

Frequently Purchased HPI Trophy Flux Parts

Visual Parts Finder
";