HPI Trophy 3.5 Buggy Rtr 4Wd 1/8 Nitro Buggy

This is the radiance powered, 2.4GHz radio managed, ready to run
1/8 scale Trophy 3.5 Rallycross Buggy from HPI.

FEATURES: Chassis: 6061 aluminum 0.12" (3mm) thick with front and rear metal
rod braces
Drive: Four wheel shaft, with steel outdrives and axles
Engine: HPI Nitro Star F3.5 .21 cu in, 2.5hp race legal, pull starter
two-stage air filter with splash guard to avoid engine from
getting flooded with water in wet conditions, composite 2-needle
carbohydrate, ABC building and big heatsink for effective heat
dissipation
Radio: 3-channel 2.4GHz with end point change, servo reversing,
guiding dual rate, failsafe and water resistant servos for steering
and throttle
Radio Tray: Low profile aluminum
Fuel Tank: 5.4oz (160cc)
Differentials: Bevel Gear type with four internal equipments for increased
sturdiness
Shocks: Oil-filled aluminum body
Shock Towers: 6061 aluminum
Brake: Dual drilled steel discs with fiber brake pads
Suspension: Additional long arms for higher stability and thick
suspension pins for higher resistance against crash damage
Spur Gear: 46 tooth steel
Steering: Bellcrank type with cast aluminum knuckles and servo saver
Body: Painted and cut, black rear wing
Bumpers: Front plastic
Wheels: 7 spoke black in color, 1.6" (42mm) broad, 3.1" (80mm)
size
Tires: Team HB Proto with big lugs for high traction, 1.6" (41.8mm)
broad, 3.1" (79mm) inner size
Ball Bearings: Complete set
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and back, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
car
Service warranty: 2 year restricted, valid just in the U.S.A, Canada and South
America

CONSISTS OF: RTR 1/8 scale Trophy 3.5 Rallycross Buggy, .21 cu in Engine w/Pull
Beginner, Body, Decals, 3-channel 2.4GHz Radio, Directions and
8 AA batteries

REQUIRES: Glow Fuel: Vehicle mix with 10-20% nitro content
Glow starter
Structure and track equipment

SPECIFICATIONS: Car-
Length: 20.4" (518mm)
Width: 11.8" (300mm)
Height: 7.1" (180mm)
Track: 11" (280mm) opposite edges of tires, side-to-side
Body-
Length: 14.2" (360mm)
Width: 8.5" (215mm)
Height: 3.5" (89mm)

REMARKS: For replacement or to update to ball bearings use:
Qty. Size Place Qty. Bearing Set
2 5x10mm Clutch 1 DTXC1535
3 8x16mm Fr Diff 2 DTXC1585
3 8x16mm Back Diff 2 DTXC1585
3 8x16mm Center Diff 2 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
2 8x16mm Front Gearbox 1 DTXC1585
4 8x16mm Back Centers 2 DTXC1585
4 8x16mm Front Hubs 2 DTXC1585
4 6x10mm Steering 2 DTXC1561