HPI Trophy 3.5 Buggy Rtr 4Wd 1/8 Nitro Buggy

This is the radiance powered, 2.4GHz radio managed, prepared to run
1/8 scale Trophy 3.5 Rallycross Buggy from HPI.

FUNCTIONS: Chassis: 6061 aluminum 0.12" (3mm) close front and rear metal
rod braces
Drive: 4 wheel shaft, with steel outdrives and axles
Engine: HPI Nitro Star F3.5 .21 cu in, 2.5hp race legal, pull starter
two-stage air filter with splash guard to prevent engine from
getting flooded with water in wet conditions, composite 2-needle
carbohydrate, ABC building and construction and big heatsink for efficient heat
dissipation
Radio: 3-channel 2.4GHz with end point change, servo reversing,
steering dual rate, failsafe and waterproof servos for steering
and throttle
Radio Tray: Low profile aluminum
Fuel Tank: 5.4oz (160cc)
Differentials: Bevel Equipment type with four internal equipments for increased
durability
Shocks: Oil-filled aluminum body
Shock Towers: 6061 aluminum
Brake: Dual drilled steel discs with fiber brake pads
Suspension: Additional long arms for higher stability and thick
suspension pins for higher resistance against crash damage
Stimulate Equipment: 46 tooth steel
Steering: Bellcrank type with cast aluminum knuckles and servo saver
Body: Painted and trimmed, black rear wing
Bumpers: Front plastic
Wheels: Seven spoke black in color, 1.6" (42mm) large, 3.1" (80mm)
diameter
Tires: Group HB Proto with big lugs for high traction, 1.6" (41.8mm)
large, 3.1" (79mm) inner diameter
Ball Bearings: Complete set
Caster: Adjustable, caster/toe-in describes the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and back, camber describes the angle of the
tops of the tires from vertical when viewed from front or behind
automobile
Warranty: 2 year restricted, legitimate just in the U.S.A, Canada and South
America

INCLUDES: RTR 1/8 scale Trophy 3.5 Rallycross Buggy, .21 cu in Engine w/Pull
Starter, Body, Decals, 3-channel 2.4GHz Radio, Guidelines and
eight AA batteries

NEEDS: Shine Fuel: Automobile blend with 10-20% nitro material
Radiance starter
Structure and track devices

SPECIFICATIONS: Car-
Length: 20.4" (518mm)
Width: 11.8" (300mm)
Height: 7.1" (180mm)
Track: 11" (280mm) opposite edges of tires, side-to-side
Body-
Length: 14.2" (360mm)
Width: 8.5" (215mm)
Height: 3.5" (89mm)

REMARKS: For replacement or to update to ball bearings utilize:
Qty. Size Area Qty. Bearing Set
2 5x10mm Clutch 1 DTXC1535
3 8x16mm Fr Diff 2 DTXC1585
3 8x16mm Back Diff 2 DTXC1585
3 8x16mm Center Diff 2 DTXC1585
2 8x16mm Rear Transmission 1 DTXC1585
2 8x16mm Front Transmission 1 DTXC1585
4 8x16mm Back Hubs 2 DTXC1585
4 8x16mm Front Hubs 2 DTXC1585
4 6x10mm Steering 2 DTXC1561