JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Model: HPI 107016
Dist. #: HPID7016   SKU: HPI107016

Be the first to review this product. (Write Review)

Back-Order Now!
Expected Availability: Early November

List Price:  $819.00
Price:  $459.99 & FREE SHIPPING
You Save:  $359.01 (44%)
Updated on Oct 21, 2017 10:44:39 PM

Trophy Buggy Flux RTR...
This is the brushless electrical powered, 2.4GHz radio controlled, ready to run
1/8 scale Prize Flux Buggy Racer from HPI.

FUNCTIONS: Chassis: 6061 aluminum 0.16" (4mm) thick with front and rear metal
rod braces
Drive: 4 wheel shaft, with steel outdrives and axles
Motor: Flux Scream brushless 1965kV
ESC: Flux Rage, deals with two 2S batteries for up to FOUR (14.4V) of
Radio: 3-channel 2.4GHz with end point modification, servo reversing,
guiding double rate, failsafe and water resistant servo for guiding
Radio Tray: Low profile aluminum
Differentials: Bevel Gear type with four internal gears for increased
Shocks: Oil-filled, aluminum body
Shock Towers: 6061 aluminum
Suspension: Additional long arms for greater stability and thick
suspension pins for greater resistance against crash damage
Steering: Bellcrank type with cast aluminum knuckles and servo saver
Body: Painted and trimmed
Bumpers: Front plastic
Wheels: Seven spoke 1.6" (41.8mm), 2.4" (60mm) diameter, 17mm hex
Tires: Hot Bodies Proto, 1.6" (40mm) broad, 4.3"(110mm) diameter
Ball Bearings: Full set
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the vehicle in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
Service warranty: Two year restricted, valid just in the USA, Canada and South

CONSISTS OF: RTR 1/8 scale Prize Flux Buggy Racer with Brushless Motor, ESC,
Body, Decals, 3-channel 2.4GHz Radio and 4 AA Batteries and
User's manual
REQUIRES: Batteries: Two 2S LiPo batteries with Deans plugs
Battery Charger: For picked batteries
Upkeep and track devices

SPECS: Vehicle-
Length: 20.3" (518mm)
Width: 11.8" (300mm)
Height: 7.1" (180mm)
Wheelbase: 13.1" (333mm)
Track: 11" (280mm) external edges of tires, side-to-side
Length: 13.1" (333mm)
Width: 7.9" (200mm) at largest point
Height: 4" (102mm)

COMMENTS: For replacement or to upgrade to ball bearings use:
Qty. Size Location Qty. Bearing Set
3 8x16mm Fr Diff 2 DTXC1585
3 8x16mm Back Diff 2 DTXC1585
2 8x16mm Rear Transmission 1 DTXC1585
4 8x16mm Back Hubs 2 DTXC1585
2 8x16mm Back Transmission 1 DTXC1585
2 8x16mm Front Transmission 1 DTXC1585
4 8x16mm Front Hubs 2 DTXC1585
4 6x10mm Steering 2 DTXC1561


X-Plosion Parts Finder Click Below For Parts Explosions For HPI Trophy Flux

Frequently Purchased HPI Trophy Flux Parts

HPI Flanged Locknut M5X8mm Black SVG X (4)
$5.99 $6.99


HPI Differential Case
$7.99 $10.99


HPI Rear Wheel Hub Left/Right


HPI Antenna Pipe w/Cap
$1.99 $2.99


Visual Parts Finder
What's New?
Zenoah Muffler Set (2) ZP80