HPI Trophy Buggy Flux RTR

This is the brushless electrical powered, 2.4GHz radio managed, ready to run
1/8 scale Trophy Flux Buggy Racer from HPI.

FEATURES: Chassis: 6061 aluminum 0.16" (4mm) thick with front and rear metal
rod braces
Drive: 4 wheel shaft, with steel outdrives and axles
Motor: Flux Scream brushless 1965kV
ESC: Flux Rage, manages 2 2S batteries for up to FOUR (14.4V) of
power
Radio: 3-channel 2.4GHz with end point change, servo reversing,
guiding double rate, failsafe and water resistant servo for guiding
Radio Tray: Low profile aluminum
Differentials: Bevel Gear type with four internal gears for increased
toughness
Shocks: Oil-filled, aluminum body
Shock Towers: 6061 aluminum
Suspension: Additional long arms for greater stability and thick
suspension pins for greater resistance against crash damage
Steering: Bellcrank type with cast aluminum knuckles and servo saver
Body: Painted and trimmed
Bumpers: Front plastic
Wheels: Seven spoke 1.6" (41.8mm), 2.4" (60mm) size, 17mm hex
Tires: Hot Bodies Proto, 1.6" (40mm) large, 4.3"(110mm) size
Ball Bearings: Complete set
Caster: Adjustable, caster/toe-in describes the angle of the front
suspension when seen from the side of the car in relation to
the chassis
Camber: Adjustable front and back, camber describes the angle of the
tops of the tires from vertical when seen from front or behind
car
Warranty: 2 year limited, valid just in the USA, Canada and South
America

CONSISTS OF: RTR 1/8 scale Trophy Flux Buggy Racer with Brushless Motor, ESC,
Body, Decals, 3-channel 2.4GHz Radio and 4 AA Batteries and
User's manual
REQUIRES: Batteries: 2 2S LiPo batteries with Deans plugs
Battery Battery charger: For chosen batteries
Upkeep and track equipment

SPECS: Automobile-
Length: 20.3" (518mm)
Width: 11.8" (300mm)
Height: 7.1" (180mm)
Wheelbase: 13.1" (333mm)
Track: 11" (280mm) outer edges of tires, side-to-side
Body-
Length: 13.1" (333mm)
Width: 7.9" (200mm) at widest point
Height: 4" (102mm)

REMARKS: For replacement or to update to ball bearings use:
Qty. Size Place Qty. Bearing Set
3 8x16mm Fr Diff 2 DTXC1585
3 8x16mm Rear Diff 2 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
4 8x16mm Rear Hubs 2 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
2 8x16mm Front Gearbox 1 DTXC1585
4 8x16mm Front Hubs 2 DTXC1585
4 6x10mm Steering 2 DTXC1561