HPI Spur Gear, 47 Tooth, Savage

This is the 47T Spur Gear for the HPI Savage .25.

FEATURES:
Black plastic building and construction

INCLUDES:
One 47T spur gear
One clutch pad HPIC7231

This is a great enhancement to the thing presently being reviewed.

Exhaust Manifold Spring, 3.2X75x0.7Mm X 56, (2Pcs), Savage X

These are the Replacement Exhaust Manifold Springs for the HPI Savage.

FEATURES:
Black Steel Manifold Springs.

INCLUDES:
2 Springs.

REQUIRES:
HPI Savage.

SPECS:
Length: 91 mm (3.58")
Spring Diameter: 3.2 mm (0.1258")
Wire Diameter: 0.7 mm (0.0275")

REMARKS:
None.

This thing praises the main item here.

One Way Bearing, For Pullstart Nitro Star G3.0, S-25, F Series

This is the One-Way bearing for the HPI Nitro Star 21BB engine.
** Likewise fits the Roto Start for the Savage.**
    This One-Way Bearing permits the recoil starter to get hold of
the crankshaft to start the engine and spin easily in the opposite direction.

FEATURES:
Steel building and construction

INCLUDES:
One one-way bearing
One setup instruction sheet

REQUIRES:
Installing in recoil system

SPECIFICATIONS:
Total Length: 12mm (.472")
Hex Width: 12mm (.472")
Inner Diameter: 6mm (.218")

REMARKS:
If recoil system is required, utilize HPIG1428

Get this thing to improve the one you are reading about.

Dual Fiberglass Brake Disk And Plate Set, 19X35x2.5Mm, Savage X

This is the HPI Fiberglass Brake Disk for
usage with the Savage X 4.6

FEATURES:
Fiberglass building and construction
Aluminum Disc Plates
For usage with the 6 x 19 x 21mm Cup Joints (HPIC6322)

INCLUDES:
2 Fiberglass Brake Disk
Three disc plates
Installing hardware

REQUIRES:
Installation on the automobile

SPECIFICATIONS:
Diameter: 35.5mm
Thickness: 2.7mm

REMARKS:
Likewise works on the Savage XL
For the Cup Joint, order HPIC6322

This thing praises the above reviewed thing.

Stainless Slipper Disk

This is the Stock Replacement Slipper Plate for the HPI Nitro Rush.
This part lies on the spur gear.

FEATURES:
Stainless-steel building and construction

INCLUDES:
One slipper plate

REQUIRES:
Installation on the automobile

SPECIFICATIONS:
Outer diameter: 33mm (1.30")
Inner diameter: 16.5mm (0.65")
Thickness: 1.4mm (0.06")

REMARKS:
This part is specific to the Nitro Rush.