HPI Spur Gear, 47 Tooth, Savage

This is the 47T Spur Gear for the HPI Savage .25.

FEATURES:
Black plastic construction

INCLUDES:
One 47T spur equipment
One clutch pad HPIC7231

This is a wonderful addition to the thing currently being talked about.

Exhaust Manifold Spring, 3.2X75x0.7Mm X 56, (2Pcs), Savage X

These are the Replacement Exhaust Manifold Springs for the HPI Savage.

FEATURES:
Black Steel Manifold Springs.

INCLUDES:
Two Springs.

REQUIRES:
HPI Savage.

SPECS:
Length: 91 mm (3.58")
Spring Diameter: 3.2 mm (0.1258")
Wire Diameter: 0.7 mm (0.0275")

COMMENTS:
None.

This thing compliments the main item below.

One Way Bearing, For Pullstart Nitro Star G3.0, S-25, F Series

This is the One-Way bearing for the HPI Nitro Star 21BB engine.
** Also fits the Roto Start for the Savage.**
    This One-Way Bearing allows the recoil starter to get hold of
the crankshaft to start the engine and spin easily in the opposite direction.

FEATURES:
Steel construction

INCLUDES:
One one-way bearing
One installation guideline sheet

REQUIRES:
Setting up in recoil system

SPECIFICATIONS:
Overall Length: 12mm (.472")
Hex Width: 12mm (.472")
Inner Diameter: 6mm (.218")

COMMENTS:
If recoil system is needed, utilize HPIG1428

Get this thing to boost the one you are reading about.

Dual Fiberglass Brake Disk And Plate Set, 19X35x2.5Mm, Savage X

This is the HPI Fiberglass Brake Disk for
use with the Savage X 4.6

FEATURES:
Fiberglass construction
Aluminum Disc Plates
For use with the 6 x 19 x 21mm Cup Joints (HPIC6322)

INCLUDES:
Two Fiberglass Brake Disk
3 disc plates
Installing hardware

REQUIRES:
Installation on the automobile

SPECIFICATIONS:
Diameter: 35.5mm
Thickness: 2.7mm

COMMENTS:
Also deals with the Savage XL
For the Cup Joint, order HPIC6322

This thing compliments the above talked about thing.

Stainless Slipper Disk

This is the Stock Replacement Slipper Plate for the HPI Nitro Rush.
This part is located on the spur gear.

FEATURES:
Stainless-steel construction

INCLUDES:
One slipper plate

REQUIRES:
Installation on the automobile

SPECIFICATIONS:
Outer diameter: 33mm (1.30")
Inner diameter: 16.5mm (0.65")
Thickness: 1.4mm (0.06")

COMMENTS:
This part is specific to the Nitro Rush.