HPI Spur Gear, 47 Tooth, Savage

This is the 47T Spur Gear for the HPI Savage .25.

FUNCTIONS:
Black plastic building and construction

SUCHES AS:
One 47T spur equipment
One clutch pad HPIC7231

This is a wonderful enhancement to the thing presently being reviewed.

Exhaust Manifold Spring, 3.2X75x0.7Mm X 56, (2Pcs), Savage X

These are the Replacement Exhaust Manifold Springs for the HPI Savage.

FEATURES:
Black Steel Manifold Springs.

INCLUDES:
2 Springs.

REQUIRES:
HPI Savage.

SPECS:
Length: 91 mm (3.58")
Spring Diameter: 3.2 mm (0.1258")
Wire Diameter: 0.7 mm (0.0275")

COMMENTS:
None.

This thing praises the main item here.

One Way Bearing, For Pullstart Nitro Star G3.0, S-25, F Series

This is the One-Way bearing for the HPI Nitro Star 21BB engine.
** Also fits the Roto Start for the Savage.**
    This One-Way Bearing permits the recoil starter to get hold of
the crankshaft to begin the engine and spin freely in the opposite direction.

FEATURES:
Steel building and construction

SUCHES AS:
One one-way bearing
One installation instruction sheet

NEEDS:
Installing in recoil unit

SPECS:
Overall Length: 12mm (.472")
Hex Width: 12mm (.472")
Inner Diameter: 6mm (.218")

COMMENTS:
If recoil unit is required, utilize HPIG1428

Get this thing to boost the one you read around.

Dual Fiberglass Brake Disk And Plate Set, 19X35x2.5Mm, Savage X

This is the HPI Fiberglass Brake Disk for
usage with the Savage X 4.6

FUNCTIONS:
Fiberglass building and construction
Aluminum Disc Plates
For usage with the 6 x 19 x 21mm Cup Joints (HPIC6322)

SUCHES AS:
2 Fiberglass Brake Disk
Two disc plates
Installing hardware

NEEDS:
Installation on the car

SPECS:
Diameter: 35.5mm
Thickness: 2.7mm

COMMENTS:
Also deals with the Savage XL
For the Cup Joint, order HPIC6322

This thing praises the above reviewed thing.

Stainless Slipper Disk

This is the Stock Replacement Slipper Plate for the HPI Nitro Rush.
This part lies on the spur gear.

FEATURES:
Stainless steel building and construction

SUCHES AS:
One slipper plate

NEEDS:
Installation on the car

SPECS:
External diameter: 33mm (1.30")
Inner diameter: 16.5mm (0.65")
Thickness: 1.4mm (0.06")

COMMENTS:
This part specifies to the Nitro Rush.