HPI Spur Gear, 47 Tooth, Savage

This is the 47T Spur Gear for the HPI Savage .25.

FUNCTIONS:
Black plastic building and construction

INCLUDES:
One 47T spur equipment
One clutch pad HPIC7231

This is a superb enhancement to the item currently being reviewed.

Exhaust Manifold Spring, 3.2X75x0.7Mm X 56, (2Pcs), Savage X

These are the Replacement Exhaust Manifold Springs for the HPI Savage.

FEATURES:
Black Steel Manifold Springs.

INCLUDES:
2 Springs.

REQUIRES:
HPI Savage.

SPECS:
Length: 91 mm (3.58")
Spring Diameter: 3.2 mm (0.1258")
Wire Diameter: 0.7 mm (0.0275")

COMMENTS:
None.

This item praises the main item here.

One Way Bearing, For Pullstart Nitro Star G3.0, S-25, F Series

This is the One-Way bearing for the HPI Nitro Star 21BB engine.
** Also fits the Roto Start for the Savage.**
    This One-Way Bearing allows the recoil starter to get
the crankshaft to begin the engine and spin freely in the opposite direction.

FEATURES:
Steel building and construction

INCLUDES:
One one-way bearing
One setup direction sheet

NEEDS:
Setting up in recoil system

SPECIFICATIONS:
General Length: 12mm (.472")
Hex Width: 12mm (.472")
Inner Diameter: 6mm (.218")

COMMENTS:
If recoil system is required, use HPIG1428

Get this item to enhance the one you are reading about.

Dual Fiberglass Brake Disk And Plate Set, 19X35x2.5Mm, Savage X

This is the HPI Fiberglass Brake Disk for
usage with the Savage X 4.6

FUNCTIONS:
Fiberglass building and construction
Aluminum Disc Plates
For usage with the 6 x 19 x 21mm Cup Joints (HPIC6322)

INCLUDES:
2 Fiberglass Brake Disk
3 disc plates
Installing hardware

NEEDS:
Setup on the vehicle

SPECIFICATIONS:
Diameter: 35.5mm
Thickness: 2.7mm

COMMENTS:
Also deals with the Savage XL
For the Cup Joint, order HPIC6322

This item praises the above reviewed item.

Stainless Slipper Disk

This is the Stock Replacement Slipper Plate for the HPI Nitro Rush.
This part is located on the spur gear.

FEATURES:
Stainless steel building and construction

INCLUDES:
One slipper plate

NEEDS:
Setup on the vehicle

SPECIFICATIONS:
Outer diameter: 33mm (1.30")
Inner diameter: 16.5mm (0.65")
Thickness: 1.4mm (0.06")

COMMENTS:
This part specifies to the Nitro Rush.