HPI Spur Gear, 47 Tooth, Savage

This is the 47T Spur Gear for the HPI Savage .25.

FEATURES:
Black plastic construction

INCLUDES:
One 47T spur equipment
One clutch pad HPIC7231

This is a superb addition to the item currently being discussed.

Exhaust Manifold Spring, 3.2X75x0.7Mm X 56, (2Pcs), Savage X

These are the Replacement Exhaust Manifold Springs for the HPI Savage.

FEATURES:
Black Steel Manifold Springs.

INCLUDES:
2 Springs.

REQUIRES:
HPI Savage.

SPECS:
Length: 91 mm (3.58")
Spring Diameter: 3.2 mm (0.1258")
Wire Diameter: 0.7 mm (0.0275")

COMMENTS:
None.

This item praises the main item here.

One Way Bearing, For Pullstart Nitro Star G3.0, S-25, F Series

This is the One-Way bearing for the HPI Nitro Star 21BB engine.
** Also fits the Roto Start for the Savage.**
    This One-Way Bearing allows the recoil starter to grab
the crankshaft to begin the engine and spin easily in the opposite direction.

FEATURES:
Steel construction

INCLUDES:
One one-way bearing
One installation instruction sheet

NEEDS:
Setting up in recoil system

SPECS:
Overall Length: 12mm (.472")
Hex Width: 12mm (.472")
Inner Diameter: 6mm (.218")

COMMENTS:
If recoil system is needed, utilize HPIG1428

Get this item to boost the one you are reading about.

Dual Fiberglass Brake Disk And Plate Set, 19X35x2.5Mm, Savage X

This is the HPI Fiberglass Brake Disk for
usage with the Savage X 4.6

FEATURES:
Fiberglass construction
Aluminum Disc Plates
For usage with the 6 x 19 x 21mm Cup Joints (HPIC6322)

INCLUDES:
2 Fiberglass Brake Disk
Two disc plates
Mounting hardware

NEEDS:
Setup on the automobile

SPECS:
Diameter: 35.5mm
Thickness: 2.7mm

COMMENTS:
Also works on the Savage XL
For the Cup Joint, order HPIC6322

This item praises the above discussed item.

Stainless Slipper Disk

This is the Stock Replacement Slipper Plate for the HPI Nitro Rush.
This part lies on the spur gear.

FEATURES:
Stainless steel construction

INCLUDES:
One slipper plate

NEEDS:
Setup on the automobile

SPECS:
External diameter: 33mm (1.30")
Inner diameter: 16.5mm (0.65")
Thickness: 1.4mm (0.06")

COMMENTS:
This part is specific to the Nitro Rush.