HPI Split Washer, 3X6mm, (20Pcs)

These are the 3x6mm Spring Washers from HPI Racing.

FEATURES:
Steel construction
Silver in color

INCLUDES:
Twenty 3x6mm Spring Washers

SPECIFICATIONS:
Outer Size: 6mm
Inner Size: 3mm

Frequently bought with the item that you are presently checking out.



This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Load with
the Venom Universal Plug System.

FEATURES:
Wired for stabilizing
Venom Universal 4 Plug System enables connection in between today's
    four most common battery plugs, Tamiya, Traxxas, Deans and EC3,
    simply attach wanted plug to Venom plug on battery's wire leads

INCLUDES:
7.4V 5000mAh 40C Hardcase LiPo Battery Load with Tamiya, Traxxas,
    Deans and EC3 Plugs

NEEDS:
LiPo capable charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if using
    Duratrax Onyx series
LiPo Balancer such as the Team Checkpoint Pro Cars and truck balancer (TCPP9150)

SPECIFICATIONS:
Configuration: 2S
Weight: 277g (9.8oz)
Measurements: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Continuous Discharge 40C (200A)
Minutes Discharge Volts Per Load: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Load: 8.4V

REMARKS:
CHECK OUT the ENTIRE guideline sheet included with battery prior to usage
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER permit to Release below 2.5V per cell
NEVER dismantle or modify pack wiring in any way or leak cells
NEVER put on flammable materials or leave unattended throughout
charging
ALWAYS charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
ALWAYS stay out of reach of children

Below is a excellent item that lots of others have bought at the exact same time.

Flange Locknut M4 (4)

These are 4mm Flanged Lock Nuts from HPI Racing.

FEATURES:
Plain black steel construction.
Nylon inserts.
Can be utilized for wheels, slipper clutch springs, & other applications
    which need easy removal and will not loosen due to vibrations.

INCLUDES:
(4) Flanged Locking Nuts

SPECIFICATIONS:
Size: 9.6mm (.38")
Thread Size: 4mm
Height: 5.7mm (.23")

This item compliments the above discussed item.

2-Speed Set Screw M3x3mm (6)

These are 3x3mm Set Screws by HPI.

FEATURES:
Plain silver metal construction.
Hexagon socket drive insert.

INCLUDES:
(6) Set Screws

SPECIFICATIONS:
Thread: 3mm (0.118")
Length: 3mm (0.118")

This item compliments the main item right here.

Set Screw M4x4mm Proceed (4)

These are 4x4mm Set Screws by HPI.

FEATURES:
Steel Set Screws

INCLUDES:
4 4x4mm Set Screws

This item compliments the main item right here.

Cap Head Screw, M2.6X14mm, Hex Socket, Bullet Mt/St (10Pcs)

This is the Button Head Screw M2.6*14mm
For the HPI Racing Bullet Series

FEATURES:
Black colored steel construction

INCLUDES:
10 button head screws

REMARKS:
The HPI Racing Bullet Series includes
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)