HPI Silicone O-Ring P-3 Red

This is a Bundle of Red P-3 Silicone O-Rings for Hobby Use.
These are utilized in shocks, soaking up vibration, and numerous other uses.

FEATURES:
Silicone construction.

INCLUDES:
Five P3 o-rings.

NEEDS:
Nothing. These are direct replacement parts.

SPECS:
Inner diameter: 3mm (0.20")

REMARKS:
These o-rings are not limited to utilize just in HPI automobiles.

Often bought with the item that you are currently checking out.



This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Pack with
the Venom Universal Plug System.

FEATURES:
Wired for balancing
Venom Universal Four Plug System allows connectivity in between today's
    four most common battery plugs, Tamiya, Traxxas, Deans and EC3,
    simply connect preferred plug to Venom plug on battery's wire leads

CONSISTS OF:
7.4V 5000mAh 40C Hardcase LiPo Battery Pack with Tamiya, Traxxas,
    Deans and EC3 Plugs

NEEDS:
LiPo capable battery charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if utilizing
    Duratrax Onyx series
LiPo Balancer such as the Group Checkpoint Pro Car balancer (TCPP9150)

SPECS:
Setup: 2S
Weight: 277g (9.8oz)
Dimensions: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Continuous Discharge 40C (200A)
Minutes Discharge Volts Per Pack: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Pack: 8.4V

REMARKS:
READ the ENTIRE direction sheet consisted of with battery prior to use
ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER permit to Discharge below 2.5V per cell
NEVER dismantle or customize pack wiring in any way or leak cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS charge in a fireproof location
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of children

Want an additional fantastic item to match the above mentioned item?

Slipper Clutch Spring, 7X9x1.7Mm, 3 Coils, Bullet Mt/St

This is the Slipper Clutch Spring 7x9x1.7mm 3 Coils
For the HPI Racing Bullet Series

FEATURES:
Black colored steel construction

CONSISTS OF:
One spring

REMARKS:
The HPI Racing Bullet Series includes
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

Want an additional fantastic item to match the above mentioned item?

Spring, 13.5X63x1.2Mm, 11 Coils, Bullet Mt/St (2Pcs)

This is the Shock Spring 13.5x63x1.2mm 11 Coils
For the HPI Racing Bullet Series

FEATURES:
Steel construction

CONSISTS OF:
Two Shock Springs

REMARKS:
The HPI Racing Bullet Series includes
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)