HPI Shock Body Set, Bullet Mt/St (2 Sets)

This is the Shock Body Set (2 Sets)
For the HPI Racing Bullet Series

FUNCTIONS:
Black colored, two complete shock bodies.
Plastic building

INCLUDES:
Six parts

REMARKS:
The HPI Racing Bullet Series consists of
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

Want an additional great item to enhance the above discussed item?



This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Load with
the Venom Universal Plug System.

FEATURES:
Wired for stabilizing
Venom Universal Four Plug System enables connectivity in between today's
    4 most common battery plugs, Tamiya, Traxxas, Deans and EC3,
    just connect wanted plug to Venom plug on battery's wire leads

INCLUDES:
7.4V 5000mAh 40C Hardcase LiPo Battery Load with Tamiya, Traxxas,
    Deans and EC3 Plugs

REQUIRES:
LiPo capable charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if using
    Duratrax Onyx series
LiPo Balancer such as the Team Checkpoint Pro Automobile balancer (TCPP9150)

SPECIFICATIONS:
Configuration: 2S
Weight: 277g (9.8oz)
Dimensions: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Continuous Discharge 40C (200A)
Minutes Discharge Volts Per Load: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Load: 8.4V

REMARKS:
READ the ENTIRE direction sheet included with battery before usage
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Release listed below 2.5V per cell
NEVER take apart or modify pack circuitry in any way or leak cells
NEVER put on combustible materials or leave ignored during
charging
ALWAYS charge in a fireproof place
ALWAYS set charger's output volts to match battery volts
CONSTANTLY keep out of reach of kids

Get this item to boost the one you are reading about.

Silicone O-Ring P-3 Red

This is a Plan of Red P-3 Silicone O-Rings for Pastime Use.
These are utilized in shocks, taking in vibration, and numerous other uses.

FEATURES:
Silicone construction.

INCLUDES:
5 P3 o-rings.

REQUIRES:
Absolutely nothing. These are direct replacement parts.

SPECS:
Inner size: 3mm (0.20")

REMARKS:
These o-rings are not limited to use just in HPI cars.

This is a great addition to the item presently being discussed.

Binder Head Screw, M3x8mm, (10Pcs)

These are 3x8mm Binder Head Screws from HPI Racing.
(Penny not included)
FEATURES:
Plain black steel construction.
Binder head with a phillips recess drive insert.
Used for numerous applications in all HPI automobiles and trucks

INCLUDES:
(10) Screws

SPECIFICATIONS:
Length: 8mm
Size: 3mm