HPI Shock Body Set, Bullet Mt/St (2 Sets)

This is the Shock Body Set (2 Sets)
For the HPI Racing Bullet Series

FEATURES:
Black colored, 2 complete shock bodies.
Plastic construction

INCLUDES:
Six parts

COMMENTS:
The HPI Racing Bullet Series includes
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

Want another terrific thing to compliment the above mentioned thing?



This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Load with
the Venom Universal Plug System.

FEATURES:
Wired for stabilizing
Venom Universal Four Plug System allows connection in between today's
    4 most typical battery plugs, Tamiya, Traxxas, Deans and EC3,
    just attach preferred plug to Venom plug on battery's wire leads

INCLUDES:
7.4V 5000mAh 40C Hardcase LiPo Battery Load with Tamiya, Traxxas,
    Deans and EC3 Plugs

REQUIRES:
LiPo capable charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if utilizing
    Duratrax Onyx series
LiPo Balancer such as the Team Checkpoint Pro Vehicle balancer (TCPP9150)

SPECS:
Configuration: 2S
Weight: 277g (9.8oz)
Dimensions: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Constant Discharge 40C (200A)
Minutes Discharge Volts Per Load: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Load: 8.4V

COMMENTS:
READ the ENTIRE direction sheet consisted of with battery prior to use
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER allow to Release listed below 2.5V per cell
NEVER take apart or customize pack circuitry in any method or leak cells
NEVER place on flammable products or leave unattended throughout
charging
ALWAYS charge in a fire-resistant area
ALWAYS set charger's output volts to match battery volts
CONSTANTLY keep out of reach of children

Get this thing to enhance the one you are reading about.

Silicone O-Ring P-3 Red

This is a Bundle of Red P-3 Silicone O-Rings for Hobby Use.
These are utilized in shocks, absorbing vibration, and many other uses.

FEATURES:
Silicone construction.

INCLUDES:
Five P3 o-rings.

REQUIRES:
Nothing. These are direct replacement parts.

SPECS:
Inner size: 3mm (0.20")

COMMENTS:
These o-rings are not restricted to utilize just in HPI lorries.

This is a great enhancement to the thing currently being reviewed.

Binder Head Screw, M3x8mm, (10Pcs)

These are 3x8mm Binder Head Screws from HPI Racing.
(Penny not consisted of)
FEATURES:
Plain black steel construction.
Binder head with a phillips recess drive insert.
Used for many applications in all HPI automobiles and trucks

INCLUDES:
(10) Screws

SPECS:
Length: 8mm
Size: 3mm