HPI Shock Body Set, Bullet Mt/St (2 Sets)

This is the Shock Body Set (2 Sets)
For the HPI Racing Bullet Series

FEATURES:
Black colored, two complete shock bodies.
Plastic building and construction

CONSISTS OF:
6 parts

REMARKS:
The HPI Racing Bullet Series consists of
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

Want one more wonderful thing to compliment the above mentioned thing?



This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Load with
the Venom Universal Plug System.

FEATURES:
Wired for stabilizing
Venom Universal 4 Plug System permits connectivity in between today's
    4 most common battery plugs, Tamiya, Traxxas, Deans and EC3,
    simply connect desired plug to Venom plug on battery's wire leads

CONSISTS OF:
7.4V 5000mAh 40C Hardcase LiPo Battery Load with Tamiya, Traxxas,
    Deans and EC3 Plugs

REQUIRES:
LiPo capable charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if using
    Duratrax Onyx series
LiPo Balancer such as the Group Checkpoint Pro Car balancer (TCPP9150)

SPECIFICATIONS:
Setup: 2S
Weight: 277g (9.8oz)
Measurements: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Continuous Discharge 40C (200A)
Minutes Discharge Volts Per Load: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Load: 8.4V

REMARKS:
READ the ENTIRE instruction sheet included with battery prior to use
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER enable to Release below 2.5V per cell
NEVER dismantle or modify pack wiring in any way or leak cells
NEVER put on combustible materials or leave ignored during
charging
ALWAYS charge in a fire-resistant area
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of kids

Get this thing to boost the one you are reading around.

Silicone O-Ring P-3 Red

This is a Plan of Red P-3 Silicone O-Rings for Hobby Use.
These are utilized in shocks, absorbing vibration, and lots of other uses.

FEATURES:
Silicone construction.

INCLUDES:
Five P3 o-rings.

REQUIRES:
Absolutely nothing. These are direct replacement parts.

SPECS:
Inner size: 3mm (0.20")

REMARKS:
These o-rings are not limited to use just in HPI lorries.

This is a amazing enhancement to the thing currently being discussed.

Binder Head Screw, M3x8mm, (10Pcs)

These are 3x8mm Binder Head Screws from HPI Racing.
(Cent not included)
FEATURES:
Plain black steel construction.
Binder head with a phillips recess drive insert.
Used for lots of applications in all HPI cars and trucks

CONSISTS OF:
(10) Screws

SPECIFICATIONS:
Length: 8mm
Diameter: 3mm