HPI Shock Body Set, Bullet Mt/St (2 Sets)

This is the Shock Body Set (2 Sets)
For the HPI Racing Bullet Series

FUNCTIONS:
Black colored, two total shock bodies.
Plastic building and construction

CONSISTS OF:
6 parts

REMARKS:
The HPI Racing Bullet Series includes
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

Want another great thing to enhance the above mentioned thing?



This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Pack with
the Venom Universal Plug System.

FEATURES:
Wired for stabilizing
Venom Universal Four Plug System allows connectivity between today's
    four most typical battery plugs, Tamiya, Traxxas, Deans and EC3,
    just attach desired plug to Venom plug on battery's wire leads

CONSISTS OF:
7.4V 5000mAh 40C Hardcase LiPo Battery Pack with Tamiya, Traxxas,
    Deans and EC3 Plugs

REQUIRES:
LiPo capable battery charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if using
    Duratrax Onyx series
LiPo Balancer such as the Team Checkpoint Pro Car balancer (TCPP9150)

SPECIFICATIONS:
Setup: TWO
Weight: 277g (9.8oz)
Dimensions: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Constant Discharge 40C (200A)
Min Discharge Volts Per Pack: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Pack: 8.4V

REMARKS:
READ the ENTIRE direction sheet consisted of with battery prior to usage
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER enable to Release below 2.5V per cell
NEVER take apart or customize pack circuitry in any method or puncture cells
NEVER place on flammable products or leave unattended during
charging
ALWAYS charge in a fire-resistant location
ALWAYS set battery charger's output volts to match battery volts
ALWAYS stay out of reach of kids

Get this thing to boost the one you are reading around.

Silicone O-Ring P-3 Red

This is a Plan of Red P-3 Silicone O-Rings for Hobby Use.
These are used in shocks, taking in vibration, and numerous other uses.

FEATURES:
Silicone construction.

INCLUDES:
Five P3 o-rings.

REQUIRES:
Absolutely nothing. These are direct replacement parts.

SPECS:
Inner size: 3mm (0.20")

REMARKS:
These o-rings are not restricted to use only in HPI vehicles.

This is a amazing addition to the thing currently being reviewed.

Binder Head Screw, M3x8mm, (10Pcs)

These are 3x8mm Binder Head Screws from HPI Racing.
(Dime not consisted of)
FEATURES:
Plain black steel construction.
Binder head with a phillips recess drive insert.
Used for numerous applications in all HPI vehicles and trucks

CONSISTS OF:
(10) Screws

SPECIFICATIONS:
Length: 8mm
Size: 3mm