HPI 1/5 Scale Baja 5B Flux 2Wd Electric Desert Buggy Sbk With Clear

The one and only initial HPI Baja 5B is BACK and all set for you to construct from the ground up! The HPI SBK collection of Self Construct Packages grows with the addition of not simply one, however TWO 1/5th scale HPI sets! Fans of electric off-road RC will be very excited to construct their own brushless-powered 1/5th scale with the HPI Baja 5B FLUX Self Build Package! Experience the excitement and excitement of developing a cars and truck which ends up being over 80cm (almost 32 inches) long and weighing almost 10kg (over 21 lb)! Just install your own electronic devices as you construct the Baja 5B FLUX and you'll be all set for any adventure that comes your way!

With extra-tough drivetrain parts taken straight from the gasoline-powered variation such as the thick torque differential, super-durable composite spur gear with internal damping and all-metal drivetrain, the Baja 5B FLUX is all set for approximately 8S of raw LiPo power, so you can see speeds of over 50 miles per hour!

The Baja 5B FLUX is likewise geared up with extra-big and super-tough suspension parts, including amazing HPI durability! With its expertly created molded composite suspension plus extra-long adjustable HD shocks, and massive high impact nylon 3-piece beadlock wheels, the Baja 5B is all set for full-speed racing on any off-road circuit!

The 4mm thick 6061 aluminum monocoque chassis fits a huge battery box and has space for the BIGGEST brushless motors you can discover for RC, and likewise includes an adjustable motor mount. Accurate steering is supplied by a dual-bellcrank rack and cam-type servo saver. Aluminum parts are anodized in cool gunmetal and a sleek FLUX-specific clear polycarbonate body is consisted of in the SBK package, all set for your custom racing scheme!

The tube roll cage is made of high impact nylon and topped with a genuine aluminum roofing to continue the traditional looks. The roll cage is totally functional and safeguards the motor and internals from crash damage. The roll cage, radio box, body panels, wing, undertray and gear case are all installed with quick access clips for easy maintenance.

The Baja 5B SBK Consists Of these Upgrades:

Front & Rear Sway Bars (86618)- Front and rear sway bars enhances handling and gives quicker steering reaction over. Include more tuning possibilities with the Sway Bar Set!

Super Strong Drive Shaft (104966) - The 9mm thick Super Strong Drive Shafts and matching HD drivetrain parts add a severe amount of strength to the drivetrain, and the rubber boots keep mud and lawn from the outdrives and bearings.

Rear Center Carrier (104781) - The one-piece Rear Center Carriers are easier to adjust, more long lasting, and are a lighter weight than the initial multi-piece center carriers. They likewise enable toe-in changes of 0, 1, 2, 3, and 4 degrees to assist match the Baja's performance to track conditions.

24mm Strong Front Hex Center (105612) - Changing the initial C-clip front hex center, the HD Front Hex Center adds a severe amount of strength to the front suspension and considerably enhances the durability of the HPI Baja 5B.

Recommended electronic specifications:

Motor: 1/5th scale motor with 800KV rating, optimum 113mm (length) x 56mm (size) with 30mm M4 mounting holes

Speed controller: 1/5th scale ESC with 200 amp constant existing rating to match the motor

Battery: overall of 4S-8S LiPo, integrated optimum size 200 x 84 x 47mm

High-current adapters: matching adapters for the motor, ESC and batteries

Radio system: 2-channel radio & transmitter set with voltage & signal failsafe

Servo: minimum 25kg/cm or 486oz-in rating with 75mm mounting (large scale basic size)

Battery charger: LiPo balance charger suitable for picked vehicle battery.

Kit Requirements

Overall Length 817mm

Height: 255mm

Width: Front - 460mm; Rear - 480mm

Tire Track (to center of tires): Front - 395mm; Rear - 400mm

Wheelbase: 570mm

Trip Height: 76mm

Suspension Travel: Front - 95mm; Rear - 100mm

Weight: 9.6kg (21.3lb)

Adjustable Camber: front - shims; back - screw

Front caster: adjustable with shim 22 / 25.5* / 29 degrees (* stock)

Toe-in: Front adjustable with tie rod; Rear adjustable with inserts 0-4 degrees (3 degrees stock set-up)

Airplane aluminum 6061 T6 monocoque chassis

Double wishbone suspension with adjustable roll center F/R

Drive system: HD metal gears with sealed transmission (8.382:1 gear ratio)

Differential: thick torque control with 4 pinion gears; sealed diff case with silicone oil

Shock absorber: HD Aluminum coilover shock absorber with totally adjustable preload collar

Wheel type: 3-piece beadlock design, high impact nylon product with inset sturdy metal hex center

Features:

Product Created: 07/15/2022