HPI 1/5 Scale Baja 5B 2Wd Gas Powered Desert Buggy Sbk With Clear Bo

The one and only original HPI Baja 5B is BACK and all set for you to construct from the ground up! The HPI SBK collection of Self Build Kits grows with the addition of not just one, but TWO 1/5th scale HPI packages! Now, YOU can construct and own the legend! Experience the excitement and excitement of developing a vehicle which ends up being over 80cm (nearly 32 inches) long and weighing nearly 10kg (over 21 lb)! Simply install your own engine and electronic devices as you construct the HPI Baja 5B and you'll be all set for any adventure that comes your method! With extra-tough drivetrain parts like the thick torque differential, super-durable composite spur gear with internal damping and all-metal drivetrain, the HPI Baja 5B is all set for your 23-32cc 2-stroke engine so you can experience the joy of gas-powered RC and approximately 30-minute runtimes!

The HPI Baja 5B is likewise equipped with extra-big and super-tough suspension parts, including awesome HPI resilience! With its expertly created molded composite suspension plus extra-long adjustable HD shocks, and enormous high effect nylon 3-piece beadlock wheels, the Baja 5B is all set for full-speed racing on any off-road circuit!

The 4mm thick 6061 aluminum monocoque chassis provides the HPI Baja 5B the timeless desert racing buggy look. Exactly bent into shape for optimal strength, the chassis supplies the mounting points for the engine and suspension, forming the backbone of the automobile. Accurate steering is supplied by a dual-bellcrank rack and cam-type servo saver. Aluminum parts are anodized in cool gunmetal and the timeless Baja desert racer clear polycarbonate body is consisted of in the SBK kit, all set for your customized racing scheme!

The tube roll cage is made from high effect nylon and topped with a real aluminum roof to continue the timeless appearances. The roll cage is fully practical and secures the motor and internals from crash damage. The roll cage, radio box, body panels, wing, undertray and gear case are all mounted with fast access clips for simple maintenance.

The Baja 5B SBK Consists Of these Upgrades:

Front & Rear Sway Bars - Front and rear sway bars improves handling and provides quicker steering action over. Add more tuning possibilities with the #86618 Sway Bar Set!

Super Heavy Duty Drive Shaft - The 9mm thick Super Heavy Duty Drive Shafts and matching HD drivetrain parts include a severe quantity of strength to the drivetrain, and the rubber boots keep mud and lawn from the outdrives and bearings. #104966

Rear Center Carrier - The one-piece Rear Center Carriers are much easier to change, more durable, and are a lighter weight than the original multi-piece hub providers. They likewise permit toe-in adjustments of 0, 1, 2, 3, and 4 degrees to assist match the Baja's efficiency to track conditions. #104781

24mm Heavy Duty Front Hex Center - Changing the original C-clip front hex hub, the HD Front Hex Center includes a severe quantity of strength to the front suspension and considerably improves the resilience of the HPI Baja 5B. # 105612

Suggested devices requirements:

Engine & Exhaust: 23-32cc engine with standard RC large scale mounting points with box or tuned pipeline exhaust

Radio system: Minimum 2-channel radio & transmitter set with voltage & signal failsafe

Steering servo: Minimum 25kg/cm or 486oz-in score with 75mm mounting (large scale standard size)

Throttle servo: Minimum 7kg/cm or 100oz-in score (1/10th requirement size)

Receiver battery: 6V bulge design (2+3) pack with plug to fit receiver

Battery charger: charger suitable for picked receiver battery

Package Specs:

General Length 817mm

Height: 255mm

Width: Front - 460mm; Rear - 480mm

Tire Track (to center of tires): Front - 395mm; Rear - 400mm

Wheelbase: 570mm

Trip Height: 76mm

Suspension Travel: Front - 95mm; Rear - 100mm

Weight: 9.6kg (21.3lb)

Adjustable Camber: front - shims; back - screw

Front caster: adjustable with shim 22 / 25.5* / 29 degrees (* stock)

Toe-in: Front adjustable with tie rod; Rear adjustable with inserts 0-4 degrees (3 degrees stock set-up)

Double wishbone suspension with adjustable roll center F/R

Drive system: HD metal equipments with sealed transmission (8.382:1 gear ratio)

Differential: thick torque control with 4 pinion equipments; sealed diff case with silicone oil

Shock absorber: HD Aluminum coilover shock absorber with fully adjustable preload collar

Wheel type: 3-piece beadlock style, high effect nylon material with inset heavy-duty metal hex hub

Features:

Item Created: 07/15/2022