HPI 1/5 Scale Baja 5B 2Wd Gas Powered Desert Buggy Sbk With Clear Bo

The one and only original HPI Baja 5B is BACK and prepared for you to construct from the ground up! The HPI SBK collection of Self Develop Kits grows with the addition of not simply one, but 2 1/5th scale HPI sets! Now, YOU can construct and own the legend! Experience the adventure and excitement of developing a car which winds up being over 80cm (nearly 32 inches) long and weighing nearly 10kg (over 21 pound)! Simply install your own engine and electronic devices as you construct the HPI Baja 5B and you'll be prepared for any adventure that comes your way! With extra-tough drivetrain parts like the viscous torque differential, super-durable composite spur gear with internal damping and all-metal drivetrain, the HPI Baja 5B is prepared for your 23-32cc 2-stroke engine so you can experience the delight of gas-powered RC and as much as 30-minute runtimes!

The HPI Baja 5B is likewise equipped with extra-big and super-tough suspension parts, featuring awesome HPI durability! With its skillfully designed molded composite suspension plus extra-long adjustable HD shocks, and enormous high impact nylon 3-piece beadlock wheels, the Baja 5B is prepared for full-speed racing on any off-road circuit!

The 4mm thick 6061 aluminum monocoque chassis gives the HPI Baja 5B the traditional desert racing buggy appearance. Specifically bent into shape for maximum strength, the chassis supplies the mounting points for the engine and suspension, forming the foundation of the cars and truck. Exact steering is supplied by a dual-bellcrank rack and cam-type servo saver. Aluminum parts are anodized in cool gunmetal and the traditional Baja desert racer clear polycarbonate body is consisted of in the SBK kit, prepared for your custom racing scheme!

The tube roll cage is made from high impact nylon and topped with a real aluminum roofing to continue the traditional appearances. The roll cage is fully functional and safeguards the motor and internals from crash damage. The roll cage, radio box, body panels, wing, undertray and gear case are all installed with quick gain access to clips for easy maintenance.

The Baja 5B SBK Includes these Upgrades:

Front & Rear Sway Bars - Front and rear sway bars improves handling and gives quicker steering action over. Add more tuning possibilities with the #86618 Sway Bar Set!

Super Heavy Duty Drive Shaft - The 9mm thick Super Heavy Duty Drive Shafts and matching HD drivetrain parts add a major quantity of toughness to the drivetrain, and the rubber boots keep mud and grass from the outdrives and bearings. #104966

Rear Center Provider - The one-piece Rear Center Carriers are easier to adjust, more resilient, and are a lighter weight than the original multi-piece hub providers. They likewise permit toe-in adjustments of 0, 1, 2, 3, and 4 degrees to assist match the Baja's efficiency to track conditions. #104781

24mm Heavy Duty Front Hex Center - Replacing the original C-clip front hex hub, the HD Front Hex Center adds a major quantity of strength to the front suspension and considerably improves the durability of the HPI Baja 5B. # 105612

Recommended equipment specifications:

Engine & Exhaust: 23-32cc engine with standard RC large scale mounting points with box or tuned pipe exhaust

Radio system: Minimum 2-channel radio & transmitter set with voltage & signal failsafe

Steering servo: Minimum 25kg/cm or 486oz-in ranking with 75mm mounting (large scale standard size)

Throttle servo: Minimum 7kg/cm or 100oz-in ranking (1/10th requirement size)

Receiver battery: 6V hump style (2+3) pack with plug to fit receiver

Battery battery charger: battery charger appropriate for chosen receiver battery

Set Specs:

Overall Length 817mm

Height: 255mm

Width: Front - 460mm; Rear - 480mm

Tire Track (to center of tires): Front - 395mm; Rear - 400mm

Wheelbase: 570mm

Ride Height: 76mm

Suspension Travel: Front - 95mm; Rear - 100mm

Weight: 9.6kg (21.3pound)

Adjustable Camber: front - shims; back - screw

Front caster: adjustable with shim 22 / 25.5* / 29 degrees (* stock)

Toe-in: Front adjustable with tie rod; Rear adjustable with inserts 0-4 degrees (3 degrees stock set-up)

Double wishbone suspension with adjustable roll center F/R

Drive system: HD metal equipments with sealed transmission (8.382:1 gear ratio)

Differential: viscous torque control with 4 pinion equipments; sealed diff case with silicone oil

Shock absorber: HD Aluminum coilover shock absorber with fully adjustable preload collar

Wheel type: 3-piece beadlock design, high impact nylon product with inset durable metal hex hub

Functions:

Item Produced: 07/15/2022