HPI Savage XS Flux Vaughn Gittin Jr 4WD

This is the Brushless Electric Powered, 2.4GHz Radio Controlled, RTR
Vaughn Gitten Jr. Signature Edition Savage XS Flux Mini Monster Truck from HPI.

FEATURES:
Chassis: Aluminum TVP (Twin Vertical Plate) with integrated roll
    hoop
Own: Four wheel
Transmission: Metal gear
Differentials: Four metal gears
Brushless Motor: FLUX MMH 4000Kv with 4-pole high-torque rotor
Electronic Speed Control: FLUX EMH-3S
Battery Box: Fits standard LiPo batteries and 6-cell NiMH stick
    loads
Radio: HPI 2.4GHz TF-40 with RF-40WP receiver
    SS20WR waterproof guiding servo
Body: GT2X trimmed with Vaughn Gitten Jr. competitors graphics and
    all sponsor decals used, universal fit body installs
Shocks: Oil-filled, composite plastic body
Shock Towers: Composite plastic
Suspension: Aluminum front and rear braces, stainless-steel
    bulkhead lower plates
Wheels: Green plastic 2.2" Classic King, 12mm hexes
Tires: Power Pin, white firmness substance
Ball Bearings: Full set
Bumpers: Front and rear skid plate type
Pinion Gear: 28T
Stimulate Gear: Own gear, metal 49T/idler gear 32T-56T
Caster: Non-adjustable, caster/toe-in refers to the angle of the
    front suspension when seen from the side of the cars and truck in relation
    to the chassis
Camber: Non-adjustable, camber refers to the angle of the tops of
    the tires from vertical when seen from front or behind vehicle
Guarantee: Two year restricted start at date of purchase. Valid just
    in U.S.A, Canada and South America

CONSISTS OF:
Preassembled Savage XS Flux Mini Monster Truck w/2.4GHz Radio System
    4400Kv Motor, ESC, Trimmed and Painted Body, 4 AA Batteries and
    Instruction Manual

NEEDS:
Battery: TWO LiPo with T-plug adapter, a minimum of 30C discharge
    rating suggested
    optimum battery measurements, 1.8 x 5.6 x 1.2" (47 x 143 x 31mm)
Battery Battery charger: To match picked battery
Track and upkeep devices

SPECS:
Lorry;
Length: 14.17" (360mm)
Width: 11.02" (280mm)
Height: 6.29" (160mm)
Wheelbase: 8.85" (225mm)
Weight: 4.73pounds (2.15kg) without batteries
    Body;
Length: 12.79" (325mm)
Width: 5.90" (150mm)
Height: 3.74" (95mm)

COMMENTS:
For maximum speed utilize the #106401 HPI Plazma 3S 3200mAh LiPo battery
    HPIC6402, with #105809 HPIC5809 and #6924 HPIC6924 optional gears.

For Replacement Ball Bearings use:
    Qty. Size Area Qty. Bearing Set
4 5x11x4mm Fr Uprights 2 DTXC1547
4 5x11x4mm Rear Uprights 2 DTXC1547
3 5x11x4mm Transmission 2 DTXC1547
1 10x15x4mm Transmission 1 DTXC1595
2 5x11x4mm Idler Gear 1 DTXC1547
2 10x15x4mm Fr Differential 1 DTXC1595
2 10x15x4mm Rear Differential 1 DTXC1595