HPI 1/8 Savage XL Flux RTR 6S 4WD

**Extra Technical Information Will be Added When It Appears.**
This is the brushless electrical powered, 2.4GHz radio controlled, prepared to run
1/8 scale HPI Savage XL Flux 6S Beast Truck.

FEATURES:
Chassis: Stiff 6061-series aluminum TVP (twin vertical plate) 0.098"
    (2.5mm) thick, additional low CG for high degree of control and
    cornering capability, included wheelie bar, twin battery boxes hold a
    variety of battery types
Drive: 4 wheel shaft
Brushless Motor: HPI Flux Tork 2200Kv with machined cooling fins, 5mm
    shaft, manages as much as 25V of power, kept in place with two machined
    8mm billet aluminum clamps and 0.12" (3mm) thick 7075 billet
    aluminum motor install
Radio:
Electronic Speed Control: Flux ELC 6S, waterproof, proportional
    brake manages as much as two 3S LiPo batteries, preinstalled cooling fan
    and T-plug connectors
Steering Servo:
Transmission: All metal equipments operating on rubber-sealed ball bearings
Differential: Geared up with machined incredibly strong bevel equipments,
    upgradeable with all nitro Savage alternative parts
Spur Gear: Machined steel, 44 tooth
Suspension: Uprights designed for the bigger tires and weight of the
    Savage XL
Wheels: HPI Warlock, chrome finish, width: 2.2" (56mm), 3.3" (83mm)
    size
Tires: GT-2 on/off-road with blocky tread pattern and durable
    sidewall teeth, 6.3" (160mm) size, 3.4" (86mm) wide
Shocks: Big Bore nylon bodied, oil filled
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
    angle of the front suspension when viewed from the side of the car
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind car
Body: Trimmed and painted GT-2

INCLUDES:
Assembled 1/8 scale HPI Savage Flux HP Beast Truck with Flux Tork
    2200 brushless motor, ELC 6 ESC, HPI 2.4GHz radio system, SF-5
    high torque metal equipment guiding servo, painted & cut body,
    wheelie bar, user's manual and HPI RC Cars DVD

REQUIRES:
AA Batteries: 6 for transmitter
Batteries:

Battery Charger: Depending on kind of batteries selected
Structure and track devices

SPECS:
Automobile-
Length:
Width:
Height:
Front and Rear Track: outer edges of tires, side to side
Front and Rear Tread: center of tires, side to side
Wheelbase:
    Body-
Length:
Width:
Height:

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Place Qty. Bearing Set
2 10x16mm Differentials 1 HPIC2032
2 8x16mm Differentials 1 DTXC1585
4 8x16mm Front Uprights 2 DTXC1585
4 8x16mm Back Uprights 2 DTXC1585
2 8x16mm Bevel Gear 1 DTXC1585
2 10x15mm Wheely Bar 1 DTXC1595
2 6x13mm Drive Shaft 1 DTXC1573
1 6x13mm Gear Shaft 1 DTXC1573
1 8x16mm Gear Shaft 1 DTXC1585
1 6x13mm Idler Gear 1 DTXC1573