HPI 1/8 Savage XL Flux RTR 6S 4WD

**Extra Technical Info Will be Added When It Becomes Available.**
This is the brushless electrical powered, 2.4GHz radio controlled, all set to run
1/8 scale HPI Savage XL Flux 6S Monster Truck.

FEATURES:
Chassis: Stiff 6061-series aluminum TVP (twin vertical plate) 0.098"
    (2.5mm) thick, extra low CG for high degree of control and
    cornering capability, included wheelie bar, twin battery boxes hold a
    variety of battery types
Own: Four wheel shaft
Brushless Motor: HPI Flux Tork 2200Kv with machined cooling fins, 5mm
    shaft, handles as much as 25V of power, kept in place with 2 machined
    8mm billet aluminum clamps and 0.12" (3mm) thick 7075 billet
    aluminum motor install
Radio:
Electronic Speed Control: Flux ELC SIX, water resistant, proportional
    brake handles as much as 2 3S LiPo batteries, preinstalled cooling fan
    and T-plug adapters
Steering Servo:
Transmission: All metal equipments working on rubber-sealed ball bearings
Differential: Equipped with machined extremely sturdy bevel equipments,
    upgradeable with all nitro Savage choice parts
Spur Equipment: Machined steel, 44 tooth
Suspension: Uprights created for the larger tires and weight of the
    Savage XL
Wheels: HPI Warlock, chrome finish, width: 2.2" (56mm), 3.3" (83mm)
    size
Tires: GT-2 on/off-road with blocky tread pattern and heavy-duty
    sidewall teeth, 6.3" (160mm) size, 3.4" (86mm) broad
Shocks: Big Bore nylon bodied, oil filled
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
    angle of the front suspension when seen from the side of the automobile
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when seen from front or behind vehicle
Body: Trimmed and painted GT-2

INCLUDES:
Assembled 1/8 scale HPI Savage Flux HP Monster Truck with Flux Tork
    2200 brushless motor, ELC 6 ESC, HPI 2.4GHz radio system, SF-5
    high torque metal gear guiding servo, painted & cut body,
    wheelie bar, instruction manual and HPI RC Cars DVD

NEEDS:
AA Batteries: 6 for transmitter
Batteries:

Battery Charger: Depending upon kind of batteries selected
Building and track equipment

SPECS:
Lorry-
Length:
Width:
Height:
Front and Rear Track: outer edges of tires, side to side
Front and Rear Tread: center of tires, side to side
Wheelbase:
    Body-
Length:
Width:
Height:

COMMENTS:
For Replacement Ball Bearings use:
    Qty. Size Location Qty. Bearing Set
2 10x16mm Differentials 1 HPIC2032
2 8x16mm Differentials 1 DTXC1585
4 8x16mm Front Uprights 2 DTXC1585
4 8x16mm Rear Uprights 2 DTXC1585
2 8x16mm Bevel Equipment 1 DTXC1585
2 10x15mm Wheely Bar 1 DTXC1595
2 6x13mm Drive Shaft 1 DTXC1573
1 6x13mm Equipment Shaft 1 DTXC1573
1 8x16mm Equipment Shaft 1 DTXC1585
1 6x13mm Idler Equipment 1 DTXC1573