HPI 1/8 Savage XL Flux RTR 6S 4WD

**Extra Technical Information Will be Included When It Appears.**
This is the brushless electric powered, 2.4GHz radio managed, ready to run
1/8 scale HPI Savage XL Flux 6S Beast Truck.

FEATURES:
Chassis: Rigid 6061-series aluminum TVP (twin vertical plate) 0.098"
    (2.5mm) thick, extra low CG for high degree of control and
    cornering ability, consisted of wheelie bar, twin battery boxes hold a
    variety of battery types
Drive: 4 wheel shaft
Brushless Motor: HPI Flux Tork 2200Kv with machined cooling fins, 5mm
    shaft, handles approximately 25V of power, held in place with two machined
    8mm billet aluminum clamps and 0.12" (3mm) thick 7075 billet
    aluminum motor mount
Radio:
Electronic Speed Control: Flux ELC SIX, water resistant, proportional
    brake handles approximately two 3S LiPo batteries, preinstalled cooling fan
    and T-plug adapters
Steering Servo:
Transmission: All metal equipments operating on rubber-sealed ball bearings
Differential: Equipped with machined extremely sturdy bevel equipments,
    upgradeable with all nitro Savage alternative parts
Spur Gear: Machined steel, 44 tooth
Suspension: Uprights created for the bigger tires and weight of the
    Savage XL
Wheels: HPI Warlock, chrome surface, width: 2.2" (56mm), 3.3" (83mm)
    diameter
Tires: GT-2 on/off-road with blocky tread pattern and sturdy
    sidewall teeth, 6.3" (160mm) diameter, 3.4" (86mm) broad
Shocks: Big Bore nylon bodied, oil filled
Caster: Adjustable front and rear toe-in, caster/toe-in describes the
    angle of the front suspension when seen from the side of the car
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when seen from front or behind vehicle
Body: Cut and painted GT-2

CONSISTS OF:
Assembled 1/8 scale HPI Savage Flux HP Beast Truck with Flux Tork
    2200 brushless motor, ELC 6 ESC, HPI 2.4GHz radio system, SF-5
    high torque metal equipment guiding servo, painted & cut body,
    wheelie bar, instruction manual and HPI RC Cars DVD

NEEDS:
AA Batteries: Six for transmitter
Batteries:

Battery Charger: Depending on type of batteries chosen
Structure and track equipment

SPECIFICATIONS:
Car-
Length:
Width:
Height:
Front and Rear Track: outer edges of tires, side to side
Front and Rear Tread: center of tires, side to side
Wheelbase:
    Body-
Length:
Width:
Height:

COMMENTS:
For Replacement Ball Bearings usage:
    Qty. Size Place Qty. Bearing Set
2 10x16mm Differentials 1 HPIC2032
2 8x16mm Differentials 1 DTXC1585
4 8x16mm Front Uprights 2 DTXC1585
4 8x16mm Back Uprights 2 DTXC1585
2 8x16mm Bevel Gear 1 DTXC1585
2 10x15mm Wheely Bar 1 DTXC1595
2 6x13mm Drive Shaft 1 DTXC1573
1 6x13mm Gear Shaft 1 DTXC1573
1 8x16mm Gear Shaft 1 DTXC1585
1 6x13mm Idler Gear 1 DTXC1573