HPI 1/8 Savage XL Flux RTR 6S 4WD

**Extra Technical Details Will be Added When It Appears.**
This is the brushless electric powered, 2.4GHz radio controlled, ready to run
1/8 scale HPI Savage XL Flux 6S Monster Truck.

FEATURES:
Chassis: Rigid 6061-series aluminum TVP (twin vertical plate) 0.098"
    (2.5mm) thick, additional low CG for high degree of control and
    cornering capability, included wheelie bar, twin battery boxes hold a
    variety of battery types
Drive: 4 wheel shaft
Brushless Motor: HPI Flux Tork 2200Kv with machined cooling fins, 5mm
    shaft, deals with approximately 25V of power, kept in place with two machined
    8mm billet aluminum clamps and 0.12" (3mm) thick 7075 billet
    aluminum motor mount
Radio:
Electronic Speed Control: Flux ELC 6S, waterproof, proportional
    brake deals with approximately two 3S LiPo batteries, preinstalled cooling fan
    and T-plug ports
Steering Servo:
Transmission: All metal equipments working on rubber-sealed ball bearings
Differential: Equipped with machined extremely strong bevel equipments,
    upgradeable with all nitro Savage choice parts
Spur Gear: Machined steel, 44 tooth
Suspension: Uprights designed for the bigger tires and weight of the
    Savage XL
Wheels: HPI Warlock, chrome surface, width: 2.2" (56mm), 3.3" (83mm)
    diameter
Tires: GT-2 on/off-road with blocky tread pattern and heavy-duty
    sidewall teeth, 6.3" (160mm) diameter, 3.4" (86mm) broad
Shocks: Big Bore nylon bodied, oil filled
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
    angle of the front suspension when seen from the side of the vehicle
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when seen from front or behind vehicle
Body: Cut and painted GT-2

INCLUDES:
Put together 1/8 scale HPI Savage Flux HP Monster Truck with Flux Tork
    2200 brushless motor, ELC 6 ESC, HPI 2.4GHz radio system, SF-5
    high torque metal gear guiding servo, painted & trimmed body,
    wheelie bar, user's manual and HPI RC Cars DVD

NEEDS:
AA Batteries: 6 for transmitter
Batteries:

Battery Battery charger: Depending upon type of batteries picked
Building and track equipment

SPECS:
Lorry-
Length:
Width:
Height:
Front and Rear Track: outer edges of tires, side to side
Front and Rear Tread: center of tires, side to side
Wheelbase:
    Body-
Length:
Width:
Height:

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Location Qty. Bearing Set
2 10x16mm Differentials 1 HPIC2032
2 8x16mm Differentials 1 DTXC1585
4 8x16mm Front Uprights 2 DTXC1585
4 8x16mm Rear Uprights 2 DTXC1585
2 8x16mm Bevel Gear 1 DTXC1585
2 10x15mm Wheely Bar 1 DTXC1595
2 6x13mm Drive Shaft 1 DTXC1573
1 6x13mm Gear Shaft 1 DTXC1573
1 8x16mm Gear Shaft 1 DTXC1585
1 6x13mm Idler Gear 1 DTXC1573