HPI 1/8 Savage XL Flux RTR 6S 4WD

**Additional Technical Details Will be Included When It Appears.**
This is the brushless electrical powered, 2.4GHz radio managed, prepared to run
1/8 scale HPI Savage XL Flux 6S Beast Truck.

FEATURES:
Chassis: Rigid 6061-series aluminum TVP (twin vertical plate) 0.098"
    (2.5mm) thick, additional low CG for high degree of control and
    cornering ability, consisted of wheelie bar, twin battery boxes hold a
    variety of battery types
Own: 4 wheel shaft
Brushless Motor: HPI Flux Tork 2200Kv with machined cooling fins, 5mm
    shaft, deals with up to 25V of power, held in place with two machined
    8mm billet aluminum clamps and 0.12" (3mm) thick 7075 billet
    aluminum motor mount
Radio:
Electronic Speed Control: Flux ELC SIX, water resistant, proportional
    brake deals with up to two 3S LiPo batteries, preinstalled cooling fan
    and T-plug connectors
Steering Servo:
Transmission: All metal equipments running on rubber-sealed ball bearings
Differential: Geared up with machined extremely sturdy bevel equipments,
    upgradeable with all nitro Savage alternative parts
Spur Equipment: Machined steel, 44 tooth
Suspension: Uprights developed for the bigger tires and weight of the
    Savage XL
Wheels: HPI Warlock, chrome surface, width: 2.2" (56mm), 3.3" (83mm)
    diameter
Tires: GT-2 on/off-road with blocky tread pattern and durable
    sidewall teeth, 6.3" (160mm) diameter, 3.4" (86mm) large
Shocks: Big Bore nylon bodied, oil filled
Caster: Adjustable front and rear toe-in, caster/toe-in describes the
    angle of the front suspension when viewed from the side of the vehicle
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when viewed from front or behind lorry
Body: Trimmed and painted GT-2

CONSISTS OF:
Put together 1/8 scale HPI Savage Flux HP Beast Truck with Flux Tork
    2200 brushless motor, ELC 6 ESC, HPI 2.4GHz radio system, SF-5
    high torque metal equipment guiding servo, painted & cut body,
    wheelie bar, instruction manual and HPI RC Cars DVD

REQUIRES:
AA Batteries: Six for transmitter
Batteries:

Battery Charger: Depending upon kind of batteries picked
Structure and track devices

SPECIFICATIONS:
Lorry-
Length:
Width:
Height:
Front and Rear Track: external edges of tires, side to side
Front and Rear Tread: center of tires, side to side
Wheelbase:
    Body-
Length:
Width:
Height:

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Location Qty. Bearing Set
2 10x16mm Differentials 1 HPIC2032
2 8x16mm Differentials 1 DTXC1585
4 8x16mm Front Uprights 2 DTXC1585
4 8x16mm Back Uprights 2 DTXC1585
2 8x16mm Bevel Equipment 1 DTXC1585
2 10x15mm Wheely Bar 1 DTXC1595
2 6x13mm Drive Shaft 1 DTXC1573
1 6x13mm Equipment Shaft 1 DTXC1573
1 8x16mm Equipment Shaft 1 DTXC1585
1 6x13mm Idler Equipment 1 DTXC1573