HPI 1/8 Savage XL Flux RTR 6S 4WD

**Extra Technical Details Will be Added When It Becomes Available.**
This is the brushless electrical powered, 2.4GHz radio managed, ready to run
1/8 scale HPI Savage XL Flux 6S Monster Truck.

FEATURES:
Chassis: Rigid 6061-series aluminum TVP (twin vertical plate) 0.098"
    (2.5mm) thick, extra low CG for high degree of control and
    cornering ability, included wheelie bar, twin battery boxes hold a
    range of battery types
Own: 4 wheel shaft
Brushless Motor: HPI Flux Tork 2200Kv with machined cooling fins, 5mm
    shaft, handles up to 25V of power, held in location with two machined
    8mm billet aluminum clamps and 0.12" (3mm) thick 7075 billet
    aluminum motor mount
Radio:
Electronic Speed Control: Flux ELC 6S, waterproof, proportional
    brake handles up to two THREE LiPo batteries, preinstalled cooling fan
    and T-plug connectors
Steering Servo:
Transmission: All metal gears working on rubber-sealed ball bearings
Differential: Geared up with machined very heavy duty bevel gears,
    upgradeable with all nitro Savage choice parts
Stimulate Gear: Machined steel, 44 tooth
Suspension: Uprights developed for the larger tires and weight of the
    Savage XL
Wheels: HPI Warlock, chrome finish, width: 2.2" (56mm), 3.3" (83mm)
    size
Tires: GT-2 on/off-road with blocky tread pattern and heavy-duty
    sidewall teeth, 6.3" (160mm) size, 3.4" (86mm) large
Shocks: Huge Bore nylon bodied, oil filled
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
    angle of the front suspension when viewed from the side of the vehicle
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind car
Body: Trimmed and painted GT-2

INCLUDES:
Put together 1/8 scale HPI Savage Flux HP Monster Truck with Flux Tork
    2200 brushless motor, ELC 6 ESC, HPI 2.4GHz radio system, SF-5
    high torque metal equipment steering servo, painted & trimmed body,
    wheelie bar, user's manual and HPI RC Cars DVD

NEEDS:
AA Batteries: 6 for transmitter
Batteries:

Battery Charger: Depending upon type of batteries selected
Building and track devices

SPECIFICATIONS:
Car-
Length:
Width:
Height:
Front and Rear Track: external edges of tires, side to side
Front and Rear Tread: center of tires, side to side
Wheelbase:
    Body-
Length:
Width:
Height:

COMMENTS:
For Replacement Ball Bearings use:
    Qty. Size Place Qty. Bearing Set
2 10x16mm Differentials 1 HPIC2032
2 8x16mm Differentials 1 DTXC1585
4 8x16mm Front Uprights 2 DTXC1585
4 8x16mm Back Uprights 2 DTXC1585
2 8x16mm Bevel Gear 1 DTXC1585
2 10x15mm Wheely Bar 1 DTXC1595
2 6x13mm Drive Shaft 1 DTXC1573
1 6x13mm Gear Shaft 1 DTXC1573
1 8x16mm Gear Shaft 1 DTXC1585
1 6x13mm Idler Gear 1 DTXC1573