HPI RTR Savage X 4.6 Nitro

This is the radiance powered, 2.4GHz radio controlled 1/8 scale, prepared to run,
Savage X 4.6 Monster Truck from HPI.

FEATURES:
Chassis: Stiff 6061 series aluminum TVP (Twin Vertical Plate)
Drive: Four wheel shaft drive with strong dogbones
Engine: HPI F4.6 with slide valve carburetor, ABC ("A"luminum piston
    with a "B"rass sleeve that is "C"hrome plated), 8-port liner,
    7.5mm slide valve composite body carburetor and double stage air
    filter
Exhaust: Composite building and construction tuned pipe, black in color
Clutch: Three shoe, strong
Electric Beginner: 6V starter with starter shaft, 7.2V 2000mAh
    battery pack and Air Conditioning wall charger
Radio: 2.4GHz pistol grip with failsafe and water resistant servos
Transmitter is TF-40 3-Channel 2.4GHz FHSS (HPIL5381)
Receiver is RF-40 3-Channel 2.4GHz (HPIL5383)
Differentials: Planetary gear with aluminum alloy cases
Shocks: Four Huge Bore, oil filled nylon body
Transmission: Two speed with adjustable shift points
Brake: Dual heat resistant fiber discs
Body: Painted and trimmed GT-3
Bumpers: Composite building and construction
Wheels: Black chrome Warlock 2.2" (56mm) broad, 3.3" (83mm) diameter
    with 17mm hex
Tires: 3.4" (85.5mm) broad, 6.2" (159mm) diameter
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when viewed from the side of the car in relation
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when viewed from front or behind automobile
Steering: Bell crank
Throttle servo: SF-10W Servo (Waterproof/4.5kg-cm6.0V) (HPIM4105)
Steering servo: SF-20W Servo (Waterproof/6.6kg-cm6.0V) (HPIM4109)
Warranty: Two year restricted through HPI beginning at date of purchase
    legitimate just in U.S.A, Canada and South America

INCLUDES:
RTR Savage X 4.6 Monster Truck, .28 cu in (4.6cc) engine with
    electrical starter, NiMH starter battery, charger, radiance starter, 8 AA
    batteries, 4-way wrench, electrical starter, fuel bottle, painted
    body

REQUIRES:
Fuel: 2-cycle radiance fuel with 20% nitromethane, 16% lubricant
Track equipment

SPECIFICATIONS:
Vehicle-
Length: 21" (534mm)
Width: 16.8" (427mm)
Height: 10" (254mm)
Wheelbase: 13.24" (336.5mm)
Suspension Travel: 5.9" (152mm)
    Body-
Length: 18" (457mm)
Width: 7" (178mm) at rear wheels, largest point
6-1/4" (158mm) behind from wheels, thinnest point
Height: 5" (127mm)

COMMENTS:
For Replacement Ball Bearings use:
    Qty. Size Place Bearing Set Qty.
4 8x16x5 FR & R gearboxes 2 DTXC1585
3 10x16x5 FR, CTR & R Diffs 2 HPIC2032
5 6x13x5 CTR gearbox 3 DTXC1573
1 8x16x5 CTR gearbox 1 DTXC1585
2 5x10x4 Clutch 1 HPIC0021
4 8x16x5 FR uprights (wheels) 2 DTXC1585
4 8x16x5 R uprights (wheels) 2 DTXC1585