HPI RS4 Sport 3 2015 Ford Mustang RTR Spec 5

This is the Electric Powered, 2.4GHz Radio Controlled, 1/10 scale,
Ready-to-Run RS4 Sport 3 On-Road Vehicle
with the Vaughn Gitten Jr. 2015 Mustang Specification 5 Demonstration Vehicle Body.

FEATURES:
Chassis: Plastic
Own: Completely confined 4 wheel shaft
Radio: HPI TF-11 2.4GHz
Motor: HPI 15T Firebolt, longitudinally installed
Electronic Speed Control: Water resistant SC-3SWP2
Differentials: Sealed metal equipment, capable of dealing with brushless
    power
Body: Ford Mustang Specification 5 trimmed and painted with all sponsor
    decals used
Shocks: Composite body, oil filled
Suspension: Double wishbone
Wheels: Neon green composite plastic, width: 1.02" (26mm), size
    1.9" (48mm)
Tires: Treaded rubber
Ball Bearings: Complete set
Battery: HPI Plazma 7.2V NiMH 2000mAh with basic port
Battery Charger: Air Conditioner powered wall type
Battery Compartment: Holds basic LiPos and up to 7-cell NiMH
    batteries, adjustable for additional traction or increased steering,
    thick hook and loop straps hold battery in location
Front Bumper: Foam
Pinion Gear: Steel, 48P 27 tooth
Stimulate Gear: Formed plastic, 48P 75 tooth
Caster: Non-adjustable, caster/toe-in refers to the angle of the
    front suspension when seen from the side of the vehicle in relation
    to the chassis
Camber: Non-Adjustable camber refers to the angle of the tops of the
    tires from vertical when seen from front or behind lorry
Service warranty: 2-year restricted through maker, legitimate only in USA,
    Canada and South America

INCLUDES:
HPI RS4 Sport 3 On-Road Vehicle with 2015 Mustang Body, Radio, ESC,
    Motor, Battery, Charger, 4 AA Batteries, Recommendations, 27T
    Pinion Gear, 75T Spur Gear

REQUIRES:
Track and maintenance equipment

SPECIFICATIONS:
Vehicle;
Length: 16.9" (430mm)
Width: 7.4" (190mm)
Height: 4.9" (125mm)
Wheelbase: 10" (255mm)
    Body;
Length: 17" (432mm)
Width: 7.7" (198mm) behind front wheels-narrowest point
8.1" (207mm) at rear wheels-widest point
Height: 4.7" (120mm)

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Place Qty. Bearing Set
2 5x10mm Drive Shaft 1 DTXC1535
2 10x15mm Front Diff 1 DTXC1595
2 10x15mm Back Diff 1 DTXC1595
4 5x10mm Front Uprights 2 DTXC1535
4 5x10mm Back Uprights 2 DTXC1535
4 5x8mm Steering 2 DTXC1523
2 3x8mm Mount Set 1 HPIC2014