JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

HPI Nitro Star T3.0 Engine, W/ Pullstart, 6.5Mm Rotary Carb, Standar (HPI 15107 | HPI15107)

Model: HPI 15107
Dist. #: HPIG0507   SKU: HPI15107

Be the first to review this product. (Write Review)

Out of stock

List Price:  $149.99
Price:  $134.99
You Save:  $15 (10%)

This item will earn you 135 reward point(s).
135 points = $2.70 off your next order. Learn More

Updated on Feb 22, 2020 04:33:38 AM

Nitro Star T3.0 Engine...
This is the HPI Nitro Star T3.0 Engine for usage
with the RTR Nitro RS4 3 Evo+

1-piece black crankcase
6.5mm Rotary Carbohydrate
Non-ringed/ ABC-type engine
Standard crankshaft
Side exhaust
Heatsink Head

One put together engine with radiance plug
One instruction manual and sticker sheet
One air filter with guideline sheet
Three zip ties
One hex wrench

Height from crankcase bottom to top of cylinder head: 3.8" (96mm)
Width consisting of mounting tabs: 1.57" (40mm)
Width below mounting tabs: 1.2" (31mm)
Width in between mounting holes very same side: 0.43" (11mm)
Width in between mounting holes opposite side: 1.2" (31mm)
Width of exhaust opening: 0.87" (22mm)
Height of exhaust opening: 0.17" (4.2mm)
Distance in between muffler mounting holes 1.1" (28mm)
Crankshaft Thread Size: 1/4-28
Bore x Stroke: 16.8 x 13.6mm
Displacement: 0.18 cu in (3.01cc)
Optimum Power: 2.2PS/31,000 RPM

Fuel with 20%-25% Nitromethane and 18% (minimum) oil content

The factory setting of the needle valves are as follows:
High speed needle: Flush with the carburetor body
Low Speed Needle: Flush with the carburetor body
Visual Parts Finder