HPI Nitro Firestorm 10T DSX-1 RTR

This is the 1/10 scale, glow powered, radio controlled, ready-to-run
HPI Firestorm 10T Off-Road Stadium Truck.

    **The distinction in between this variation and the #105865**
**is that 2 different body color schemes;**
**Blue and Yellow, HPID65BL, or Orange and White, HPID65NL can be purchased.**

**This variation is randomly supplied with either an Orange/Black**
**or Blue/Black Painted Body.**
**It is not possible to request a specific body color.**

FUNCTIONS:
Chassis: Constructed of aluminum, 0.12" (3mm) thick
Drive Type: 2 wheel (rear)
Radio: HPI TF-40 3-channel 2.4GHz with waterproof servos
    sealed removable receiver compartment with room for a five
    cell receiver battery
Engine: HPI G3.0 with pull starter, SG (pilot) shaft with rotary carbohydrate
    dual stage air filter and glow plug
Exhaust: Double chamber aluminum tuned pipeline with header
Fuel Tank: 2.5oz (75cc) flip leading cap
Clutch: 2 shoe with 0.8 module 19 tooth clutch bell
Transmission: Single speed with dual pad slipper clutch to safeguard
    the drive train on hard landings
Ball Bearings: Full set included, 16 total
Shocks: Four silicone oil-filled, composite bodied with coil-over
    spring
Main Equipment: 0.8 module 50 tooth
Gearbox: Sealed, all metal gears
Differentials: Planetary geared, sealed and tunable
Brakes: Piston actuation, fiber disc
Tires: Front-Front Line 2.1" (53mm) broad, 2.2" (57mm) diameter
Rear-Ground Attack tapered pin 2.1" (53mm) broad, 2.2" (57mm)
    diameter
Wheels: HPI Scorch 6-spoke 2" (50mm) broad, 2.2" (57mm) diameter
    with 12mm step type aluminum hexes
Body: Cut and painted stadium truck with customized silkscreen
    images
Suspension: Wide track type with recorded hinge pins
Caster: Adjustable front and rear, caster/toe-in describes the angle
    of the front suspension when viewed from the side of the automobile in
    relation to the chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when viewed from front or behind car
Steering: Bell crank with servo saver
Service warranty Duration: 2 year minimal

CONSISTS OF:
HPI Firestorm 10T Stadium Truck, 2.4GHz radio, engine, glow plug
    air filter, tuned pipeline, header, painted body, decals, wrench,
    8 AA batteries, tires, foam inserts, wheels, 19 tooth clutch bell,
    50 tooth spur gear, instructions

NEEDS:
Misc. Products: Building and track equipment
Fuel: 2-cycle glow fuel with 20%-25% nitromethane, 16% lubricant-
    Most of the fuels we bring satisfy or go beyond the lubricant content
    needed for optimum performance and optimum engine life. In the
    past, the traditional lubricant content utilized in fuel was 18%. But
    with new advanced technologies, fuels like Red Alert and O'Donnell
    for instance, have a much better quality of lubes even though the
    portions of lubricant content are lower. These high-tech
    lubes offer remarkable cooling and protection.

SPECS:
Car-
Length: 16.7" (425mm)
Front Width: 12.8" (325mm)
Back Width: 12.9" (327mm)
Height: 6.6" (167mm) measured at rear wing
Weight: 4.5 pounds (2055g) approx.
Wheelbase: 11" (279mm) adjustable
Front Tread: 10.8" (274mm)
Rear Tread: 11" (279mm) wheels on-center side-to-side
Front Track: 12.75" (324mm)
Rear Track: 12.9" (329mm) outer edges of wheels
Ground Clearance: 1.4" (35mm)
Equipment Ratio: 4.11:1
    Body-
Length: 16.4" (416mm)
Width: 6.6" (168mm) at rear wheels (largest point)
5.7" (144mm) ahead of front wheels (thinnest point)
Height: 3.8" (97mm)

COMMENTS:
For Replacement Ball Bearings usage:
    Qty. Size Area Qty. Bearing Set
4 5x10mm Front Wheels 2 DTXC1535
4 5x10mm Back Wheels 2 DTXC1535
2 5x10mm Leading Shaft 1 DTXC1535
2 5x10mm Idler Shaft 1 DTXC1535
2 10x15mm Differential 1 DTXC1595
2 5x10mm Clutch 1 DTXC1535