HPI Gear Shaft 5x29mm (2)

This is a pair of 5x29mm Gear Shafts for the
HPI Savage XS Flux Mini Beast Truck.

FEATURES:
Constructed of solidified steel

INCLUDES:
Two 5x29mm Gear Shafts

REQUIRES:
Setting up in drive systems following guidelines in manual

This is a amazing enhancement to the item presently being gone over.



This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Pack with
the Venom Universal Plug System.

FEATURES:
Wired for stabilizing
Venom Universal 4 Plug System permits connection between today's
    four most common battery plugs, Tamiya, Traxxas, Deans and EC3,
    just attach preferred plug to Venom plug on battery's wire leads

INCLUDES:
7.4V 5000mAh 40C Hardcase LiPo Battery Pack with Tamiya, Traxxas,
    Deans and EC3 Plugs

REQUIRES:
LiPo capable charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if using
    Duratrax Onyx series
LiPo Balancer such as the Group Checkpoint Pro Vehicle balancer (TCPP9150)

SPECIFICATIONS:
Configuration: 2S
Weight: 277g (9.8oz)
Measurements: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Constant Discharge 40C (200A)
Min Discharge Volts Per Pack: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Pack: 8.4V

REMARKS:
CHECK OUT the ENTIRE instruction sheet consisted of with battery before use
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER enable to Discharge listed below 2.5V per cell
NEVER disassemble or modify pack circuitry in any method or leak cells
NEVER place on flammable materials or leave ignored during
charging
ALWAYS charge in a fireproof area
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children

Lots of others have gotten this item along with the item that you are presently reviewing.

Slipper Clutch Spring, 7X9x1.7Mm, 3 Coils, Bullet Mt/St

This is the Slipper Clutch Spring 7x9x1.7mm 3 Coils
For the HPI Racing Bullet Series

FUNCTIONS:
Black colored steel building and construction

INCLUDES:
One spring

REMARKS:
The HPI Racing Bullet Series includes
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

Lots of others have gotten this item along with the item that you are presently reviewing.

Spring, 13.5X63x1.2Mm, 11 Coils, Bullet Mt/St (2Pcs)

This is the Shock Spring 13.5x63x1.2mm 11 Coils
For the HPI Racing Bullet Series

FUNCTIONS:
Steel building and construction

INCLUDES:
Two Shock Springs

REMARKS:
The HPI Racing Bullet Series includes
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

Here is a wonderful item that numerous others have purchased the same time.

Differential Gear Set, Bullet Mt/St

This is the Diff Gear Set
For the HPI Racing WRI and Bullet Series

FUNCTIONS:
Steel building and construction
Fits the WR8 Flux, Bullet MT and ST Flux, Bullet MT and ST Nitro
Likewise fits all 3 transmissions of the D413 Buggy Kit from Hot Bodies

INCLUDES:
Two big bevel gears
4 little bevel gears

REMARKS:
This differential gear set can be installed on
1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR
1/10 Bullet MT Flux 2.4GHz RTR
1/10 Bullet ST Flux 2.4GHz RTR
1/10 Bullet MT 3.0 Nitro 2.4GHz RTR
1/10 Bullet ST 3.0 Nitro 2.4GHz RTR