HPI Cap Head Screw, M3x8mm, Hex Socket, (12Pcs)

This is a set of M3x8mm Cap Head screws by HPI Racing.

FEATURES:
Steel construction

CONSISTS OF:
(12) Cap Head screws M3x8mm

SPECS:
Length: 8mm
Diameter: 3mm

You will love this item if you have the item earlier pointed out.



This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Load with
the Venom Universal Plug System.

FEATURES:
Wired for stabilizing
Venom Universal 4 Plug System allows connection between today's
    4 most common battery plugs, Tamiya, Traxxas, Deans and EC3,
    simply connect desired plug to Venom plug on battery's wire leads

CONSISTS OF:
7.4V 5000mAh 40C Hardcase LiPo Battery Load with Tamiya, Traxxas,
    Deans and EC3 Plugs

REQUIRES:
LiPo capable battery charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if utilizing
    Duratrax Onyx series
LiPo Balancer such as the Team Checkpoint Pro Vehicle balancer (TCPP9150)

SPECS:
Configuration: TWO
Weight: 277g (9.8oz)
Dimensions: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Continuous Discharge 40C (200A)
Minutes Discharge Volts Per Load: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Load: 8.4V

REMARKS:
READ the ENTIRE instruction sheet consisted of with battery prior to usage
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER enable to Release listed below 2.5V per cell
NEVER dismantle or customize pack electrical wiring in any method or puncture cells
NEVER place on combustible materials or leave ignored during
charging
ALWAYS charge in a fireproof location
ALWAYS set battery charger's output volts to match battery volts
ALWAYS keep out of reach of kids

Frequently purchased with the thing that you are presently reading about.

Slipper Clutch Spring, 7X9x1.7Mm, 3 Coils, Bullet Mt/St

This is the Slipper Clutch Spring 7x9x1.7mm 3 Coils
For the HPI Racing Bullet Series

FEATURES:
Black colored steel construction

CONSISTS OF:
One spring

REMARKS:
The HPI Racing Bullet Series includes
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

The below thing additionally sets really well with the thing being discussed.

Spring, 13.5X63x1.2Mm, 11 Coils, Bullet Mt/St (2Pcs)

This is the Shock Spring 13.5x63x1.2mm 11 Coils
For the HPI Racing Bullet Series

FEATURES:
Steel construction

CONSISTS OF:
Two Shock Springs

REMARKS:
The HPI Racing Bullet Series includes
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

Want another terrific thing to compliment the above discussed thing?

Differential Gear Set, Bullet Mt/St

This is the Diff Gear Set
For the HPI Racing WRI and Bullet Series

FEATURES:
Steel construction
Fits the WR8 Flux, Bullet MT and ST Flux, Bullet MT and ST Nitro
Likewise fits all three gearboxes of the D413 Buggy Set from Hot Bodies

CONSISTS OF:
Two big bevel gears
4 small bevel gears

REMARKS:
This differential gear set can be set up on
1/8 WR8 3.0 Ford Carnival Rally Abu Dhabi RTR
1/10 Bullet MT Flux 2.4GHz RTR
1/10 Bullet ST Flux 2.4GHz RTR
1/10 Bullet MT 3.0 Nitro 2.4GHz RTR
1/10 Bullet ST 3.0 Nitro 2.4GHz RTR