HPI Cap Head Screw, M3x8mm, Hex Socket, (12Pcs)

This is a set of M3x8mm Cap Head screws by HPI Racing.

FEATURES:
Steel construction

INCLUDES:
(12) Cap Head screws M3x8mm

SPECIFICATIONS:
Length: 8mm
Diameter: 3mm

You will certainly love this thing if you have the thing previously discussed.



This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Load with
the Venom Universal Plug System.

FEATURES:
Wired for balancing
Venom Universal Four Plug System enables connection in between today's
    four most typical battery plugs, Tamiya, Traxxas, Deans and EC3,
    simply attach desired plug to Venom plug on battery's wire leads

INCLUDES:
7.4V 5000mAh 40C Hardcase LiPo Battery Load with Tamiya, Traxxas,
    Deans and EC3 Plugs

NEEDS:
LiPo capable battery charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if using
    Duratrax Onyx series
LiPo Balancer such as the Group Checkpoint Pro Car balancer (TCPP9150)

SPECIFICATIONS:
Configuration: 2S
Weight: 277g (9.8oz)
Measurements: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Constant Discharge 40C (200A)
Min Discharge Volts Per Load: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Load: 8.4V

REMARKS:
READ the ENTIRE direction sheet consisted of with battery prior to usage
ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER allow to Release listed below 2.5V per cell
NEVER disassemble or customize pack electrical wiring in any manner in which or puncture cells
NEVER put on combustible materials or leave unattended throughout
charging
ALWAYS charge in a fire-resistant place
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of children

Often bought with the product that you are currently reading about.

Slipper Clutch Spring, 7X9x1.7Mm, 3 Coils, Bullet Mt/St

This is the Slipper Clutch Spring 7x9x1.7mm 3 Coils
For the HPI Racing Bullet Series

FUNCTIONS:
Black colored steel construction

INCLUDES:
One spring

REMARKS:
The HPI Racing Bullet Series includes
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

The listed below product also pairs really well with the product being talked about.

Spring, 13.5X63x1.2Mm, 11 Coils, Bullet Mt/St (2Pcs)

This is the Shock Spring 13.5x63x1.2mm 11 Coils
For the HPI Racing Bullet Series

FUNCTIONS:
Steel construction

INCLUDES:
Two Shock Springs

REMARKS:
The HPI Racing Bullet Series includes
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

Want another great product to match the above stated product?

Differential Gear Set, Bullet Mt/St

This is the Diff Gear Set
For the HPI Racing WRI and Bullet Series

FUNCTIONS:
Steel construction
Fits the WR8 Flux, Bullet MT and ST Flux, Bullet MT and ST Nitro
Likewise fits all three gearboxes of the D413 Buggy Set from Hot Bodies

INCLUDES:
Two large bevel gears
Four little bevel gears

REMARKS:
This differential gear set can be installed on
1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR
1/10 Bullet MT Flux 2.4GHz RTR
1/10 Bullet ST Flux 2.4GHz RTR
1/10 Bullet MT 3.0 Nitro 2.4GHz RTR
1/10 Bullet ST 3.0 Nitro 2.4GHz RTR