JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

HPI Cap Head Screw M3x8mm 4.6 HO Engine (12) (HPI Z542 | HPIZ542)

Model: HPI Z542
Dist. #: HPIC8542   SKU: HPIZ542

Be the first to review this product. (Write Review)

Shipping: In Stock For Shipping
Store Pickup:

South Jordan, UT
Available Now!

Price:  $4.99

This item will earn you 5 reward point(s).
5 points = $0.10 off your next order. Learn More

Updated on Feb 26, 2020 05:21:03 PM

Cap Head Screw M3x8mm 4.6 HO Engine (12)...
This is a set of M3x8mm Cap Head screws by HPI Racing.

FEATURES:
Steel construction

INCLUDES:
(12) Cap Head screws M3x8mm

SPECS:
Length: 8mm
Diameter: 3mm

You will certainly love this product if you have the product previously mentioned.

LiPo 2S 7.4V 5000mah 40C Hard Univ Plug

This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Pack with
the Venom Universal Plug System.

FEATURES:
Wired for stabilizing
Venom Universal 4 Plug System permits connection between today's
    4 most typical battery plugs, Tamiya, Traxxas, Deans and EC3,
    just connect wanted plug to Venom plug on battery's wire leads

INCLUDES:
7.4V 5000mAh 40C Hardcase LiPo Battery Pack with Tamiya, Traxxas,
    Deans and EC3 Plugs

NEEDS:
LiPo capable charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if utilizing
    Duratrax Onyx series
LiPo Balancer such as the Group Checkpoint Pro Car balancer (TCPP9150)

SPECS:
Setup: 2S
Weight: 277g (9.8oz)
Measurements: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Constant Discharge 40C (200A)
Min Discharge Volts Per Pack: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Pack: 8.4V

REMARKS:
CHECK OUT the ENTIRE instruction sheet consisted of with battery prior to use
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER permit to Discharge listed below 2.5V per cell
NEVER take apart or modify pack circuitry in any way or puncture cells
NEVER place on flammable materials or leave unattended throughout
charging
ALWAYS charge in a fire-resistant location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children

Often acquired with the product that you are currently checking out.

Slipper Clutch Spring 7x9x1.7mm 3 Coils

This is the Slipper Clutch Spring 7x9x1.7mm 3 Coils
For the HPI Racing Bullet Series

FUNCTIONS:
Black colored steel construction

INCLUDES:
One spring

REMARKS:
The HPI Racing Bullet Series includes
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

The listed below product also pairs actually well with the product being discussed.

Spring 13.5x63x1.2mm 11Coils

This is the Shock Spring 13.5x63x1.2mm 11 Coils
For the HPI Racing Bullet Series

FUNCTIONS:
Steel construction

INCLUDES:
2 Shock Springs

REMARKS:
The HPI Racing Bullet Series includes
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

Want another terrific product to compliment the above stated product?

Diff Gear Set

This is the Diff Gear Set
For the HPI Racing WRI and Bullet Series

FUNCTIONS:
Steel construction
Fits the WR8 Flux, Bullet MT and ST Flux, Bullet MT and ST Nitro
Likewise fits all three gearboxes of the D413 Buggy Set from Hot Bodies

INCLUDES:
2 large bevel gears
4 small bevel gears

REMARKS:
This differential gear set can be set up on
1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR
1/10 Bullet MT Flux 2.4GHz RTR
1/10 Bullet ST Flux 2.4GHz RTR
1/10 Bullet MT 3.0 Nitro 2.4GHz RTR
1/10 Bullet ST 3.0 Nitro 2.4GHz RTR

Frequently Bought Together

HPI Cap Head Screw M3x8mm 4.6 HO Engine (12)
+
HPI 40 Tooth Differential Gear, Bullet Mt/St
+
HPI Bearing 5x10mm (2)
This Item: HPI Cap Head Screw M3x8mm 4.6 HO Engine (12)
$4.99
HPI 40 Tooth Differential Gear, Bullet Mt/St
$9.99
HPI Bearing 5x10mm (2)
$19.99

Total Price: $34.97

Add All Three To Cart

Customers who bought this product also purchased

Visual Parts Finder
";