HPI Cap Head Screw, M3x8mm, Hex Socket, (12Pcs)

Model: HPI Z542
Dist. #: HPIC8542 SKU: HPIZ542

Be the first to review this product. (Write Review)

Shipping: In Stock For Shipping
Store Pickup:

South Jordan, UT
Ship To Store - Pick up in 2 to 3 days..

Price:

$3.99

This item will earn you 4 reward point(s).
4 points = $0.08 off your next order. Learn More

Updated on Apr 15, 2024 07:25:45 PM

Cap Head Screw M3x8mm 4.6 HO Engine (12)...

This is a set of M3x8mm Cap Head screws by HPI Racing.

FEATURES:
Steel building

CONSISTS OF:
(12) Cap Head screws M3x8mm

SPECIFICATIONS:
Length: 8mm
Size: 3mm

You will certainly love this item if you have the item earlier mentioned.

This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Pack with
the Venom Universal Plug System.

FEATURES:
Wired for stabilizing
Venom Universal Four Plug System permits connection in between today's
four most typical battery plugs, Tamiya, Traxxas, Deans and EC3,
simply attach desired plug to Venom plug on battery's wire leads

CONSISTS OF:
7.4V 5000mAh 40C Hardcase LiPo Battery Pack with Tamiya, Traxxas,
Deans and EC3 Plugs

REQUIRES:
LiPo capable battery charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if utilizing
Duratrax Onyx series
LiPo Balancer such as the Group Checkpoint Pro Automobile balancer (TCPP9150)

SPECIFICATIONS:
Setup: 2S
Weight: 277g (9.8oz)
Measurements: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Constant Discharge 40C (200A)
Min Discharge Volts Per Pack: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Pack: 8.4V

REMARKS:
CHECK OUT the ENTIRE direction sheet included with battery before usage
ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER enable to Release listed below 2.5V per cell
NEVER take apart or customize pack wiring in any manner in which or puncture cells
NEVER place on flammable products or leave unattended during
charging
ALWAYS charge in a fire-resistant location
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY stay out of reach of kids

Frequently purchased with the thing that you are currently reading about.

Slipper Clutch Spring, 7X9x1.7Mm, 3 Coils, Bullet Mt/St

This is the Slipper Clutch Spring 7x9x1.7mm 3 Coils
For the HPI Racing Bullet Series

FEATURES:
Black colored steel building

CONSISTS OF:
One spring

REMARKS:
The HPI Racing Bullet Series consists of
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

The below thing additionally sets really well with the thing being reviewed.

Spring, 13.5X63x1.2Mm, 11 Coils, Bullet Mt/St (2Pcs)

This is the Shock Spring 13.5x63x1.2mm 11 Coils
For the HPI Racing Bullet Series

FEATURES:
Steel building

CONSISTS OF:
Two Shock Springs

REMARKS:
The HPI Racing Bullet Series consists of
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

Want one more great thing to enhance the above discussed thing?

Differential Gear Set, Bullet Mt/St

This is the Diff Gear Set
For the HPI Racing WRI and Bullet Series

FEATURES:
Steel building
Fits the WR8 Flux, Bullet MT and ST Flux, Bullet MT and ST Nitro
Also fits all three gearboxes of the D413 Buggy Package from Hot Bodies

CONSISTS OF:
Two large bevel gears
Four little bevel gears

REMARKS:
This differential gear set can be installed on
1/8 WR8 3.0 Ford Feast Rally Abu Dhabi RTR
1/10 Bullet MT Flux 2.4GHz RTR
1/10 Bullet ST Flux 2.4GHz RTR
1/10 Bullet MT 3.0 Nitro 2.4GHz RTR
1/10 Bullet ST 3.0 Nitro 2.4GHz RTR