HPI Cap Head Screw M3x25mm Hellfire (6)

This is a Cap Head Screw Set by HPI Racing.

FEATURES:
Steel construction

INCLUDES:
(6) M3x25mm Cap Head screws

SPECIFICATIONS:
Length: 25mm
Size: 3mm

Want an additional wonderful thing to compliment the above mentioned thing?



This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Pack with
the Venom Universal Plug System.

FEATURES:
Wired for balancing
Venom Universal 4 Plug System permits connection between today's
    four most common battery plugs, Tamiya, Traxxas, Deans and EC3,
    merely attach desired plug to Venom plug on battery's wire leads

INCLUDES:
7.4V 5000mAh 40C Hardcase LiPo Battery Pack with Tamiya, Traxxas,
    Deans and EC3 Plugs

REQUIRES:
LiPo capable battery charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if using
    Duratrax Onyx series
LiPo Balancer such as the Group Checkpoint Pro Car balancer (TCPP9150)

SPECIFICATIONS:
Setup: TWO
Weight: 277g (9.8oz)
Measurements: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Continuous Discharge 40C (200A)
Minutes Discharge Volts Per Pack: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Pack: 8.4V

REMARKS:
CHECK OUT the ENTIRE direction sheet consisted of with battery prior to use
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge listed below 2.5V per cell
NEVER disassemble or modify pack circuitry in any method or puncture cells
NEVER place on flammable products or leave unattended throughout
charging
ALWAYS charge in a fireproof area
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of kids

Want an additional wonderful thing to compliment the above mentioned thing?

Body Pin, 6Mm, Silver/Medium, (20Pcs)

This is a package of Medium Chrome Body Pins from HPI.

FEATURES:
Chrome surface
Features resilient steel construction.

INCLUDES:
Consists of twenty medium body pins.

SPECS:
Length: 0.83" (21mm)

This is a amazing enhancement to the thing presently being reviewed.

Slipper Clutch Spring, 7X9x1.7Mm, 3 Coils, Bullet Mt/St

This is the Slipper Clutch Spring 7x9x1.7mm 3 Coils
For the HPI Racing Bullet Series

FUNCTIONS:
Black colored steel construction

INCLUDES:
One spring

REMARKS:
The HPI Racing Bullet Series includes
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

Several others have purchased this thing along with the thing that you are presently reviewing.

Spring, 13.5X63x1.2Mm, 11 Coils, Bullet Mt/St (2Pcs)

This is the Shock Spring 13.5x63x1.2mm 11 Coils
For the HPI Racing Bullet Series

FUNCTIONS:
Steel construction

INCLUDES:
2 Shock Springs

REMARKS:
The HPI Racing Bullet Series includes
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)