HPI Cap Head Screw M3x25mm Hellfire (6)

This is a Cap Head Screw Set by HPI Racing.

FEATURES:
Steel building

INCLUDES:
(6) M3x25mm Cap Head screws

SPECS:
Length: 25mm
Diameter: 3mm

Want an additional terrific product to compliment the above mentioned product?



This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Load with
the Venom Universal Plug System.

FEATURES:
Wired for balancing
Venom Universal Four Plug System enables connectivity in between today's
    4 most typical battery plugs, Tamiya, Traxxas, Deans and EC3,
    simply attach preferred plug to Venom plug on battery's wire leads

INCLUDES:
7.4V 5000mAh 40C Hardcase LiPo Battery Load with Tamiya, Traxxas,
    Deans and EC3 Plugs

REQUIRES:
LiPo capable battery charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if using
    Duratrax Onyx series
LiPo Balancer such as the Group Checkpoint Pro Automobile balancer (TCPP9150)

SPECS:
Setup: TWO
Weight: 277g (9.8oz)
Measurements: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Constant Discharge 40C (200A)
Min Discharge Volts Per Load: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Load: 8.4V

REMARKS:
READ the ENTIRE instruction sheet included with battery before use
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER permit to Discharge below 2.5V per cell
NEVER disassemble or customize pack wiring in any way or leak cells
NEVER place on flammable products or leave unattended throughout
charging
ALWAYS charge in a fire-resistant area
ALWAYS set battery charger's output volts to match battery volts
ALWAYS keep out of reach of children

Want an additional terrific product to compliment the above mentioned product?

Body Pin, 6Mm, Silver/Medium, (20Pcs)

This is a plan of Medium Chrome Body Pins from HPI.

FEATURES:
Chrome surface
Features long lasting steel construction.

INCLUDES:
Consists of twenty medium body pins.

SPECS:
Length: 0.83" (21mm)

This is a superb addition to the product currently being reviewed.

Slipper Clutch Spring, 7X9x1.7Mm, 3 Coils, Bullet Mt/St

This is the Slipper Clutch Spring 7x9x1.7mm 3 Coils
For the HPI Racing Bullet Series

FEATURES:
Black colored steel building

INCLUDES:
One spring

REMARKS:
The HPI Racing Bullet Series consists of
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

Several others have purchased this product together with the product that you are currently checking out.

Spring, 13.5X63x1.2Mm, 11 Coils, Bullet Mt/St (2Pcs)

This is the Shock Spring 13.5x63x1.2mm 11 Coils
For the HPI Racing Bullet Series

FEATURES:
Steel building

INCLUDES:
2 Shock Springs

REMARKS:
The HPI Racing Bullet Series consists of
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)