HPI Cap Head Screw M3x10 (6)

This is a package of 3x10mm Caphead Maker Screws.

FEATURES:
Plain black steel construction.
High round cap head screw with a hexagon socket drive insert.
These screws can be used anywhere this size is needed.

INCLUDES:
(6) Caphead Maker Screws

REQUIRES:
2.5mm Allen/Hex Wrench

SPECS:
Size: 3mm
Length: 10mm

This item is often purchased with the above stated item.



This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Pack with
the Venom Universal Plug System.

FEATURES:
Wired for stabilizing
Venom Universal 4 Plug System enables connectivity between today's
    4 most typical battery plugs, Tamiya, Traxxas, Deans and EC3,
    just attach wanted plug to Venom plug on battery's wire leads

INCLUDES:
7.4V 5000mAh 40C Hardcase LiPo Battery Pack with Tamiya, Traxxas,
    Deans and EC3 Plugs

REQUIRES:
LiPo capable battery charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if using
    Duratrax Onyx series
LiPo Balancer such as the Group Checkpoint Pro Car balancer (TCPP9150)

SPECS:
Configuration: 2S
Weight: 277g (9.8oz)
Measurements: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Constant Discharge 40C (200A)
Min Discharge Volts Per Pack: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Pack: 8.4V

REMARKS:
READ the ENTIRE guideline sheet consisted of with battery prior to usage
ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER dismantle or customize pack circuitry in any method or puncture cells
NEVER place on flammable materials or leave unattended during
charging
ALWAYS charge in a fire-resistant location
ALWAYS set battery charger's output volts to match battery volts
ALWAYS keep out of reach of children

Here is a terrific item that several others have actually bought at the exact same time.



These are the optional Integy Steering Knuckles for the
1/10 scale HPI Bullet MT and Bullet ST.

FEATURES:
Billet machined aluminum building and construction, blue in color

INCLUDES:
Two Steering Knuckles

REQUIRES:
4 5x10mm ball bearings, order 2 DTXC1535

This item compliments the main item right here.

Slipper Clutch Spring, 7X9x1.7Mm, 3 Coils, Bullet Mt/St

This is the Slipper Clutch Spring 7x9x1.7mm 3 Coils
For the HPI Racing Bullet Series

FUNCTIONS:
Black colored steel building and construction

INCLUDES:
One spring

REMARKS:
The HPI Racing Bullet Series consists of
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)

This is a wonderful addition to the item presently being discussed.

Spring, 13.5X63x1.2Mm, 11 Coils, Bullet Mt/St (2Pcs)

This is the Shock Spring 13.5x63x1.2mm 11 Coils
For the HPI Racing Bullet Series

FUNCTIONS:
Steel building and construction

INCLUDES:
Two Shock Springs

REMARKS:
The HPI Racing Bullet Series consists of
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)