HPI Bullet Monster Truck Flux RTR

This is the brushless electric powered, 2.4GHz radio managed, prepared to run
1/10 scale Bullet MT Flux Monster Truck from HPI.

**Additional Technical Information Will Be Included When It Becomes Available.**

FEATURES:
Chassis: 6061 aluminum double deck 0.12" (3mm) thick
Drive: Four wheel shaft, with steel outdrives and axles
Motor: HPI MMH-4000, 4000Kv brushless with black anodized heatsink
    case
ESC: HPI Flux EMH-3S waterproof, brushless with Deans battery plug
    and cooling fan, can be personalized with the #101280 PC Professional
    Program Card (not consisted of)
Radio: 2.4GHz with failsafe
Guiding Servo: SF-10W waterproof
Electronics Compartment: Waterproof
Differentials: Bevel Gear type with 4 internal gears for increased
    toughness
Shocks: Eight oil-filled with caught type mounting on suspension
    arm for extra toughness
Suspension: Bonus long arms for higher stability and thick
    suspension pins for higher resistance versus crash damage
Stimulate Gear: 54 tooth plastic
Slipper Clutch: Double pad design for extra drivetrain security
Body: Painted and trimmed
Bumpers: Front and back, plastic building
Tires: All terrain 2.6" (67mm) wide, 4.8" (124mm) size
Wheels: Five Spoke black chrome surface, 14mm hex, 2.2" (56mm) wide
    3.2" (82mm) size
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when viewed from the side of the cars and truck in relation to
    the chassis
Ball Bearings: Full set
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when viewed from the side of the cars and truck in relation to
    the chassis
Camber: Adjustable front and back, camber describes the angle of the
    tops of the tires from vertical when viewed from front or behind
    car
Service warranty: 2 year restricted start at date of purchase. Legitimate just
    in US, Canada and South America. Not planned for use in the EU.

INCLUDES:
Bullet MT Flux Monster Truck with 2-channel 2.4GHz Radio, Brushless
    Motor, ESC, painted Body, 4 AA Cells and Instruction manual

NEEDS:
Battery: 7.2V NiMH 6-cell stick pack or 7.4V LiPo battery with Deans
    Ultra Female adapter
Battery Charger: To match chosen battery
Maintenance and Track equipment

SPECS:
Vehicle-
Length: 16.4" (417mm)
Width: 13.2" (336mm)
Height: 6.3" (160mm)
Track: 10.3" (263mm) external edges of tires side-to-side
Wheelbase: 10.7" (272mm)
    Body-
Length: 16.3" (415mm)
Width: 6.7" (171mm)
Height: 4.8" (122mm)

COMMENTS:
For replacement ball bearings use:
    Qty. Size Location Qty. Bearing Set
2 10x15mm Spur Gear 1 DTXC1595
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Back Diff 1 DTXC1595
2 5x10mm Fr Diff Case 1 DTXC1535
2 5x10 Back Diff Case 1 DTXC1535
4 5x10mm Fr Hubs 2 DTXC1535
4 5x10mm Back Hubs 2 DTXC1535