HPI Body Pin, 6Mm, Silver/Medium, (20Pcs)

This is a package of Medium Chrome Body Pins from HPI.

FEATURES:
Chrome surface
Features durable steel construction.

INCLUDES:
Includes twenty medium body pins.

SPECS:
Length: 0.83" (21mm)

This item is regularly acquired with the above mentioned item.



This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Load with
the Venom Universal Plug System.

FEATURES:
Wired for balancing
Venom Universal Four Plug System enables connection between today's
    4 most common battery plugs, Tamiya, Traxxas, Deans and EC3,
    just connect preferred plug to Venom plug on battery's wire leads

SUCHES AS:
7.4V 5000mAh 40C Hardcase LiPo Battery Load with Tamiya, Traxxas,
    Deans and EC3 Plugs

NEEDS:
LiPo capable battery charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if using
    Duratrax Onyx series
LiPo Balancer such as the Team Checkpoint Pro Car balancer (TCPP9150)

SPECIFICATIONS:
Setup: 2S
Weight: 277g (9.8oz)
Measurements: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Constant Discharge 40C (200A)
Min Discharge Volts Per Load: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Load: 8.4V

REMARKS:
CHECK OUT the ENTIRE guideline sheet included with battery before use
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Release below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER put on combustible products or leave unattended during
charging
ALWAYS charge in a fireproof location
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of children

Often acquired with the item that you are presently reading about.

EC3 Female to Deans Ultra-type Male Conversion Adapter

Don't want to slice the existing connector off of your ESC or battery? Want to conserve yourself a lot of soldering time? This EC3 Female to Deans Ultra-type Male Conversion Adapter is the quick, easy and budget friendly option for your mismatched connector.

You will like this item if you have the item previously discussed.

Spur Gear (83T) 48P

This is a 48P, 83T Stimulate Equipment for designs with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Developed for designs with a slipper clutch.
Black plastic building and construction

SUCHES AS:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 83

REMARKS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    86T gear (TRAC4686) and 90T gear (TRAC4690).

This is a fantastic addition to the item presently being gone over.

Slipper Clutch Spring, 7X9x1.7Mm, 3 Coils, Bullet Mt/St

This is the Slipper Clutch Spring 7x9x1.7mm 3 Coils
For the HPI Racing Bullet Series

FEATURES:
Black colored steel building and construction

SUCHES AS:
One spring

REMARKS:
The HPI Racing Bullet Series includes
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)