HPI Body Pin, 6Mm, Silver/Medium, (20Pcs)

This is a plan of Medium Chrome Body Pins from HPI.

FEATURES:
Chrome surface
Functions durable steel construction.

INCLUDES:
Suches as twenty medium body pins.

SPECS:
Length: 0.83" (21mm)

This thing is frequently bought with the above pointed out thing.



This is the Venom 7.4V 5000mAh 40C Hardcase LiPo Battery Load with
the Venom Universal Plug System.

FEATURES:
Wired for stabilizing
Venom Universal 4 Plug System permits connection between today's
    four most typical battery plugs, Tamiya, Traxxas, Deans and EC3,
    merely connect wanted plug to Venom plug on battery's wire leads

CONSISTS OF:
7.4V 5000mAh 40C Hardcase LiPo Battery Load with Tamiya, Traxxas,
    Deans and EC3 Plugs

NEEDS:
LiPo capable battery charger such as the DuraTrax Onyx series
Charge Lead Banana Plugs with Deans Ultra Male (DTXC2221) if using
    Duratrax Onyx series
LiPo Balancer such as the Team Checkpoint Pro Vehicle balancer (TCPP9150)

SPECIFICATIONS:
Configuration: 2S
Weight: 277g (9.8oz)
Measurements: 25 x 46.5 x 137.5mm (0.98" x 1.8" x 5.4")
Charge Rate: 3C (15A)
Constant Discharge 40C (200A)
Min Discharge Volts Per Load: 6.0V
Max Burst Rate: 80C (400A)
Max Volts Per Cell: 4.2V
Max Volts Per Load: 8.4V

REMARKS:
CHECK OUT the ENTIRE guideline sheet consisted of with battery prior to usage
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER allow to Release listed below 2.5V per cell
NEVER dismantle or customize pack electrical wiring in any method or puncture cells
NEVER place on flammable materials or leave unattended during
charging
ALWAYS charge in a fire-resistant location
ALWAYS set battery charger's output volts to match battery volts
ALWAYS shut out of reach of kids

Frequently bought with the thing that you are presently reading about.

EC3 Female to Deans Ultra-type Male Conversion Adapter

Don't wish to slice the existing port off of your ESC or battery? Wish to save yourself a bunch of soldering time? This EC3 Female to Deans Ultra-type Male Conversion Adapter is the quick, easy and affordable option for your mismatched port.

You will certainly love this thing if you have the thing just above discussed.

Spur Gear (83T) 48P

This is a 48P, 83T Spur Gear for designs with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Designed for designs with a slipper clutch.
Black plastic construction

CONSISTS OF:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 83

REMARKS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    86T gear (TRAC4686) and 90T gear (TRAC4690).

This is a superb addition to the thing presently being reviewed.

Slipper Clutch Spring, 7X9x1.7Mm, 3 Coils, Bullet Mt/St

This is the Slipper Clutch Spring 7x9x1.7mm 3 Coils
For the HPI Racing Bullet Series

FUNCTIONS:
Black colored steel construction

CONSISTS OF:
One spring

REMARKS:
The HPI Racing Bullet Series consists of
Bullet ST Flux 2.4GHz RTR (HPID7008)
Bullet MT Flux 2.4GHz RTR (HPID7010)
Bullet ST 3.0 Nitro 2.4GHz RTR (HPID7004)
Bullet MT 3.0 Nitro 2.4GHz RTR (HPID7006)