HPI Baja 5B SS Kit

This is the 1/5 scale, gasoline powered, radio controlled,
HPI Baja 5B SS Buggy set.

**New factory high performance choices for 2014 include;**
#87288 Steel Exhaust Header, HPIG8611
#15448 8000RPM High Reaction Clutch, HPIC1548
#87568 Aluminum Alloy Diff Case
#104966 Super Sturdy Dogbones, HPIC4966
#112845 Super Sturdy Front Hubs
#104781 One-Piece Back Uprights, HPIC4781

FEATURES:
Chassis: Narrow channel monocoque design 0.16" (4mm) thick, gun-metal
    gray in color, built of aircraft grade 6061 T6 aluminum,
    side guards safeguard engine from dirt and particles
Drive: Rear wheel gear drive with heavy duty dogbones
Engine: Fuelie 26S gas engine with pull starter,
    fast release foam air filter, guide, choke and kill switch
Steering servo: SFL-11MG Servo, metal gear/24.7kg-cm6.0Vg (HPIM2772)
Ball Bearings: Full set consisted of
Shocks: Four VVC heavy duty aluminum shocks with 5 externally
    adjustable moistening settings and dual rate springs for
    progressive moistening action on all surface areas, customized rear shock
    tower brace
Main Equipment: 57 tooth composite construction
Gearbox: Sealed, heavy duty metal equipments
Differential: Viscous Torque Control can be tuned using various
    weight diff oils, solidified metal planetary equipments, aluminum alloy
    diff case
Brakes: Aerated dual disc
Clutch: 2-shoe, 8000 RPM
Gas Tank: 25.3 oz (750cc)
Front Tires: HPI Dirt Buster Rib Pattern M substance 2.4" (60mm) wide
    6.7" (170mm) outer size
Rear Tires: HPI Dirt Buster Block Pattern S substance 3.1" (80mm)
    wide, 6.7" (170mm) outer size
Wheels: Black 5-spoke, nylon 3-piece bead lock, bead is bolted to
    wheel to hold tire securely in place-no requirement for tire glue
Body: Clear pre-cut
Rear Wing: Molded black plastic with decals applied
Roll Cage: Baja design high effect nylon protects engine and body
    from crash damage
Suspension: Fully adjustable, long travel double wishbone
Caster: Adjustable, with shims 22 / 25.5* stock / 29 degrees
    caster/toe-in refers to the angle of the front
    suspension when viewed from the side of the automobile in relation to the
    chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind lorry
Guarantee: 2-year minimal, valid just in USA, Canada and South America
Baja light sets are available - HPIC0336 (white) HPIC0337 (blue)

INCLUDES:
HPI Baja 5B SS set, engine, steering servo, 2oz (60cc) shock oil,
    1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease
    body, with wing, extra air filter, wrenches, decal sheet and
    illustrated instruction manual, 3.4oz (100cc) Z191 2-cycle oil

REQUIRES:
Radio: 2-3 ch FM or 2.4GHz with standard size servo for throttle
    (do not use AM radio)
Receiver Battery: 6V hump setup, a minimum of 3000mAh
Battery Charger: Timed or peak for receiver pack
Unleaded Fuel: 87-93 octane, mix gasoline and two cycle oil
    at 25:1 ratio,
Transmitter Batteries: AA, number depends on selected transmitter
Paint: Spray or brush-on for polycarbonate bodies
Building and track equipment

SPECIFICATIONS:
Automobile-
Length: 32.2" (817mm)
Front Width: 18.1" (460mm)
Rear Width: 18.9" (480mm)
Height: 10" (255mm) with 1G, 11" (280mm) with 0G
Trip Height: 3" (76mm)
Suspension Travel: Front 3.7" (95mm), Rear 3.9" (100mm)
Weight: 21.3 pounds (9.6kg) without fuel
Wheelbase: 22.4" (570mm) wheels on-center front-to-rear
_ Front Track: 15.5" (395mm)
Rear Track: 15.7" (400mm) outer edges of wheels
Equipment Ratio: 8.382:1
Tires- Front: 2.4" (60mm) x 6.7" (170mm)
Back: 3.1" (80mm) x 6.7" (170mm)
    Body-
Length: 22.9" (581mm)
Width: 8.8" (224mm) at rear wheels (best point)
3.25" (82mm) ahead of front wheels (thinnest point)
Height: 4.75" (121mm) at acme

COMMENTS:
For Replacement Ball Bearings use:
    Qty. Size Place Qty Bearing Set
4 12x24mm Fr Wheel Hubs 2 HPIC0089
4 12x24mm R Wheel Hubs 2 HPIC0089
2 10x15mm Steering Shafts 1 DTXC1595
2 17x30mm Idler Equipment 1 HPIC0092
2 12x24mm Drive Equipment 1 HPIC0089
1 12x24mm Spur Equipment Mount 1 HPIC0089
2 10x15mm Diff 1 DTXC1595