HPI 1/10 Venture Toyota FJ Cruiser Gunmetal 4WD RTR

**Additional Technical Info Will Be Included When It Becomes Available.**

This is the 1/10 scale Electric Powered, 2.4GHz Radio Controlled
All set to Run Toyota FJ Cruiser Endeavor Crawler in Gunmetal Gray from HPI.

FEATURES:
Chassis: Steel C-channel chassis rails and cross braces, adjustable
    side sliders
Drive: Four wheel with main transfer case, telescoping driveshafts
    and solid axles with metal diff covers
Differentials: Full-time locked, aluminum pumpkin size cover for best
    ground clearance
Transfer Case: Straightens and reduces center drive shafts for
    efficient power transfer, avoids motor stall for best climbing up
    action
Motor: Front mounted 35 turn spider specification
ESC: HPI water resistant SC-3sWP2 Crawler Edition
Battery Box:
Radio: HPI TF-40 2.4GHz 3-channel system with water resistant receiver,
    and HPI water-resistant SS-20WR steering servo
Body: Trimmed and painted officially certified Toyota FJ Cruiser with
    practical roofing rack, mirrors, front bumper with brush guard,
    light installs and D-ring shackles, rear bumper with swing away
    extra tire install and D-ring shackles, adjustable body installs for
    any design off-road body, full braced rear installs
Shocks: Oil-filled, aluminum body, double phase springs
Shock Towers: Composite plastic
Steering: BTA (Behind the Axle) linkage for improved technique and
    departure angles, CMS (Chassis Mounted Servo) reasonable setup
    Zero Ackermann high guide knuckle style for much better clearance and
    tighter turning radius, Ackermann refers to the effect of the inner
    front wheel turning faster that the external front wheel throughout turns
Suspension: 3-link front and triangulated 3-link rear suspension,
    aluminum panhard installs
Wheels: CR-10 beadlock design multi-spoke 1.9"
    12mm hexes
Tires: 1.9" Rockthorn 38mm soft S-Compound tires with chunky tread
    blocks, 4.3 x 1.5" (109 x 38mm)
Battery: NiMH
Battery Battery charger:
Ball Bearings: Complete set
Pinion Gear:
Stimulate Gear:
Service warranty: Two year restricted beginning at date of purchase. Valid just
    in U.S.A, Canada and South America

CONSISTS OF:
Preassembled Toyota FJ Cruiser Endeavor Crawler with Motor, ESC,
    Radio System, Trimmed & Painted Body, NiMH Battery, Battery charger, four
    AA Batteries, Direction Mnual

REQUIRES:
Track and maintenance equipment

SPECS:
Vehicle;
Length: 20.7" (527mm)
Width: 9" (227mm)
Height: 9.4" (238mm) with roofing rack, 8.5" (217mm) without
Wheelbase: 12.3" (311mm)
Front Overhang: 3.9" (101mm)
Back Overhang: 5.3" (135mm)
Running Weight: 5.3pounds (2.4kg)
Weight without Body: 4.7pounds (2.1kg)
Break-over angle: 44.5°
Technique Angle: 55°
Departure Angle: 45.5°
Max Climb up Angle: 49°
Max Tilt Angle: 28°
Axle Articulation: 30°
Ground Clearance 2.7" (68mm)
Ground Clearance at Requirement Ride Height: 2.4" (60mm)
Axle Ground Clearance: 1.3" (32mm)
Drivetrain Ratio: 7.6:1
Transmission Gearing: 1.53:1
Axle Gearing: 3.31:1
Transfer Case Gearing: 1.5:1

    Body;
Length:
Width:
Height:

REMARKS:
For Replacement Ball Bearings usage:
    Qty. Size Location Qty. Bearing Set