HPI 1/10 Venture Toyota FJ Cruiser Gunmetal 4WD RTR

**Additional Technical Information Will Be Added When It Appears.**

This is the 1/10 scale Electric Powered, 2.4GHz Radio Controlled
Ready to Run Toyota FJ Cruiser Endeavor Crawler in Gunmetal Gray from HPI.

FEATURES:
Chassis: Steel C-channel chassis rails and cross braces, adjustable
    side sliders
Own: 4 wheel with central transfer case, telescoping driveshafts
    and strong axles with metal diff covers
Differentials: Full-time locked, aluminum pumpkin size cover for finest
    ground clearance
Transfer Case: Straightens and lowers center drive shafts for
    effective power transfer, prevents motor stall for best climbing
    action
Motor: Front installed 35 turn spider spec
ESC: HPI water resistant SC-3sWP2 Crawler Edition
Battery Box:
Radio: HPI TF-40 2.4GHz 3-channel system with water resistant receiver,
    and HPI water-resistant SS-20WR steering servo
Body: Cut and painted formally licensed Toyota FJ Cruiser with
    practical roof rack, mirrors, front bumper with brush guard,
    light installs and D-ring shackles, rear bumper with swing away
    spare tire mount and D-ring shackles, adjustable body installs for
    any style off-road body, complete braced rear installs
Shocks: Oil-filled, aluminum body, dual stage springs
Shock Towers: Composite plastic
Steering: BTA (Behind the Axle) linkage for better approach and
    departure angles, CMS (Chassis Installed Servo) realistic setup
    Absolutely no Ackermann high steer knuckle design for much better clearance and
    tighter turning radius, Ackermann refers to the result of the inner
    front wheel turning quicker that the external front wheel during turns
Suspension: 3-link front and triangulated 3-link rear suspension,
    aluminum panhard installs
Wheels: CR-10 beadlock style multi-spoke 1.9"
    12mm hexes
Tires: 1.9" Rockthorn 38mm soft S-Compound tires with chunky tread
    blocks, 4.3 x 1.5" (109 x 38mm)
Battery: NiMH
Battery Battery charger:
Ball Bearings: Full set
Pinion Gear:
Spur Gear:
Warranty: Two year restricted start at date of purchase. Valid only
    in U.S.A, Canada and South America

CONSISTS OF:
Preassembled Toyota FJ Cruiser Endeavor Crawler with Motor, ESC,
    Radio System, Trimmed & Painted Body, NiMH Battery, Battery charger, four
    AA Batteries, Guideline Mnual

NEEDS:
Track and upkeep equipment

SPECIFICATIONS:
Automobile;
Length: 20.7" (527mm)
Width: 9" (227mm)
Height: 9.4" (238mm) with roof rack, 8.5" (217mm) without
Wheelbase: 12.3" (311mm)
Front Overhang: 3.9" (101mm)
Rear Overhang: 5.3" (135mm)
Running Weight: 5.3lbs (2.4kg)
Weight without Body: 4.7lbs (2.1kg)
Break-over angle: 44.5°
Technique Angle: 55°
Departure Angle: 45.5°
Max Climb up Angle: 49°
Max Tilt Angle: 28°
Axle Articulation: 30°
Ground Clearance 2.7" (68mm)
Ground Clearance at Standard Flight Height: 2.4" (60mm)
Axle Ground Clearance: 1.3" (32mm)
Drivetrain Ratio: 7.6:1
Transmission Gearing: 1.53:1
Axle Gearing: 3.31:1
Transfer Case Gearing: 1.5:1

    Body;
Length:
Width:
Height:

REMARKS:
For Replacement Ball Bearings usage:
    Qty. Size Place Qty. Bearing Set