HPI 1/10 Venture Toyota FJ Cruiser Gunmetal 4WD RTR

**Extra Technical Information Will Be Included When It Appears.**

This is the 1/10 scale Electric Powered, 2.4GHz Radio Controlled
Prepared to Run Toyota FJ Cruiser Venture Spider in Gunmetal Gray from HPI.

FEATURES:
Chassis: Steel C-channel chassis rails and cross braces, adjustable
    side sliders
Own: 4 wheel with main transfer case, telescoping driveshafts
    and solid axles with metal diff covers
Differentials: Full-time locked, aluminum pumpkin size cover for finest
    ground clearance
Transfer Case: Straightens and lowers center drive shafts for
    effective power transfer, avoids motor stall for best climbing
    action
Motor: Front installed 35 turn crawler spec
ESC: HPI water resistant SC-3sWP2 Spider Edition
Battery Box:
Radio: HPI TF-40 2.4GHz 3-channel system with water resistant receiver,
    and HPI water-resistant SS-20WR steering servo
Body: Cut and painted formally licensed Toyota FJ Cruiser with
    practical roof rack, mirrors, front bumper with brush guard,
    light installs and D-ring shackles, rear bumper with swing away
    spare tire install and D-ring shackles, adjustable body installs for
    any design off-road body, full braced rear installs
Shocks: Oil-filled, aluminum body, dual phase springs
Shock Towers: Composite plastic
Steering: BTA (Behind the Axle) linkage for enhanced method and
    departure angles, CMS (Chassis Mounted Servo) sensible setup
    Absolutely no Ackermann high steer knuckle design for much better clearance and
    tighter turning radius, Ackermann describes the impact of the inner
    front wheel turning faster that the external front wheel during turns
Suspension: 3-link front and triangulated 3-link rear suspension,
    aluminum panhard installs
Wheels: CR-10 beadlock design multi-spoke 1.9"
    12mm hexes
Tires: 1.9" Rockthorn 38mm soft S-Compound tires with chunky tread
    blocks, 4.3 x 1.5" (109 x 38mm)
Battery: NiMH
Battery Battery charger:
Ball Bearings: Complete set
Pinion Equipment:
Spur Equipment:
Guarantee: Two year limited beginning at date of purchase. Legitimate only
    in USA, Canada and South America

INCLUDES:
Preassembled Toyota FJ Cruiser Venture Spider with Motor, ESC,
    Radio System, Trimmed & Painted Body, NiMH Battery, Battery charger, four
    AA Batteries, Direction Mnual

REQUIRES:
Track and upkeep devices

SPECIFICATIONS:
Car;
Length: 20.7" (527mm)
Width: 9" (227mm)
Height: 9.4" (238mm) with roof rack, 8.5" (217mm) without
Wheelbase: 12.3" (311mm)
Front Overhang: 3.9" (101mm)
Back Overhang: 5.3" (135mm)
Running Weight: 5.3lbs (2.4kg)
Weight without Body: 4.7lbs (2.1kg)
Break-over angle: 44.5°
Approach Angle: 55°
Departure Angle: 45.5°
Max Climb Angle: 49°
Max Tilt Angle: 28°
Axle Articulation: 30°
Ground Clearance 2.7" (68mm)
Ground Clearance at Requirement Ride Height: 2.4" (60mm)
Axle Ground Clearance: 1.3" (32mm)
Drivetrain Ratio: 7.6:1
Transmission Gearing: 1.53:1
Axle Gearing: 3.31:1
Transfer Case Gearing: 1.5:1

    Body;
Length:
Width:
Height:

COMMENTS:
For Replacement Ball Bearings usage:
    Qty. Size Place Qty. Bearing Set