HPI 1/10 Venture Toyota FJ Cruiser Gunmetal 4WD RTR

**Additional Technical Information Will Be Included When It Becomes Available.**

This is the 1/10 scale Electric Powered, 2.4GHz Radio Controlled
Ready to Run Toyota FJ Cruiser Endeavor Spider in Gunmetal Gray from HPI.

FEATURES:
Chassis: Steel C-channel chassis rails and cross braces, adjustable
    side sliders
Drive: Four wheel with central transfer case, telescoping driveshafts
    and solid axles with metal diff covers
Differentials: Full-time locked, aluminum pumpkin size cover for finest
    ground clearance
Transfer Case: Straightens and lowers center drive shafts for
    effective power transfer, avoids motor stall for best climbing
    action
Motor: Front installed 35 turn crawler spec
ESC: HPI water resistant SC-3sWP2 Spider Edition
Battery Box:
Radio: HPI TF-40 2.4GHz 3-channel system with water resistant receiver,
    and HPI waterproof SS-20WR guiding servo
Body: Trimmed and painted officially certified Toyota FJ Cruiser with
    functional roof rack, mirrors, front bumper with brush guard,
    light mounts and D-ring shackles, rear bumper with swing away
    extra tire mount and D-ring shackles, adjustable body mounts for
    any style off-road body, complete braced rear mounts
Shocks: Oil-filled, aluminum body, double stage springs
Shock Towers: Composite plastic
Steering: BTA (Behind the Axle) linkage for enhanced method and
    departure angles, CMS (Chassis Mounted Servo) practical setup
    Zero Ackermann high guide knuckle design for much better clearance and
    tighter turning radius, Ackermann refers to the effect of the inner
    front wheel turning faster that the outer front wheel throughout turns
Suspension: 3-link front and triangulated 3-link rear suspension,
    aluminum panhard mounts
Wheels: CR-10 beadlock style multi-spoke 1.9"
    12mm hexes
Tires: 1.9" Rockthorn 38mm soft S-Compound tires with chunky tread
    blocks, 4.3 x 1.5" (109 x 38mm)
Battery: NiMH
Battery Battery charger:
Ball Bearings: Complete set
Pinion Equipment:
Stimulate Equipment:
Service warranty: 2 year limited start at date of purchase. Valid just
    in USA, Canada and South America

CONSISTS OF:
Preassembled Toyota FJ Cruiser Endeavor Spider with Motor, ESC,
    Radio System, Trimmed & Painted Body, NiMH Battery, Battery charger, 4
    AA Batteries, Guideline Mnual

REQUIRES:
Track and maintenance devices

SPECS:
Vehicle;
Length: 20.7" (527mm)
Width: 9" (227mm)
Height: 9.4" (238mm) with roof rack, 8.5" (217mm) without
Wheelbase: 12.3" (311mm)
Front Overhang: 3.9" (101mm)
Back Overhang: 5.3" (135mm)
Running Weight: 5.3pounds (2.4kg)
Weight without Body: 4.7pounds (2.1kg)
Break-over angle: 44.5°
Technique Angle: 55°
Departure Angle: 45.5°
Max Climb Angle: 49°
Max Tilt Angle: 28°
Axle Articulation: 30°
Ground Clearance 2.7" (68mm)
Ground Clearance at Standard Ride Height: 2.4" (60mm)
Axle Ground Clearance: 1.3" (32mm)
Drivetrain Ratio: 7.6:1
Transmission Gearing: 1.53:1
Axle Gearing: 3.31:1
Transfer Case Gearing: 1.5:1

    Body;
Length:
Width:
Height:

COMMENTS:
For Replacement Ball Bearings usage:
    Qty. Size Location Qty. Bearing Set